7Ah Battery 750C Display 250W Mid-Drive E-Bike Conversion Kit

BBS01B 36V 250W Mid-Drive Electric Bike Conversion Kit. Is the perfect choice for a flawless yet cost-effective Electric Bike. Bafang is renowned for producing motors that are regarded as the very best in the conversion world. Their motors are waterproof for all riding conditions, internally lubricated with sealed casings, and contain a nylon gear for a silent, yet exquisite ride every time! The 250w motor is best suited for U. Use as this is the legal riding limit. The integrated speed sensor and pedal assistance recognises and aids manual output to boost your ride by up to 15mph. Five pedal assistance modes are available, so you can conquer the toughest of rides. This motor weighs approximately 4kg and is designed to fit bottom brackets with a length between 68mm – 73mm (2.68 – 2.87). If you have a Fat Bike, with a 100mm – 120mm bottom bracket length, get in touch with us, as you will require an axle extension. We specialise in crafting custom wiring looms with extended, braided cables tailored specifically for trikes, ensuring cable protection along the adjustable boom. Your trike’s unique needs deserve special attention, and we’re here to provide it! The inner diameter of the bottom bracket should be no less than 33.5mm. More information can be found about bike compatibility on our Bike Information page. Bafang 36V 250W Mid Drive Motor (With XT60 Battery Connector), GRIDE 7Ah Li-Ion Battery. (With XT60 Battery Connector), Battery Frame Mount, Velcro Cable Strap, Keys, 2A Power Adaptor (UK Plug), 750. C LCD Display, Thumb Throttle, E-Brakes, (Can Upgrade to Brake Sensors for Either Hydraulic Brakes or Integrated Shifters), Speed Sensor & Magnet, EB-BUS (1T4) Cable, Cranks, Chainring, Chainguard, Bottom Bracket Installation Tool, All Mounting Hardware Inc. 73mm BB Spacer for Larger Bottom Brackets. This kit’s display (750C) offers the following; Speed Display & Lever Indicator, Power Display & Lever Indicator, Pedal Assistance Mode 0-5, Headlight Indicator, Brake Indicator, Riding Time, Mileage Indicator, Battery Indicator, Speed Warning, Riding Timer & Error Code Detection. Our batteries guarantee reliability and sustained performance in all conditions to ensure you get the most efficient ride every time. This battery will cover an approximate 20-mile range and has a display to show battery percentage. Each battery is complete with a USB socket for charging devices on the go. The battery mount is installed onto the bike using the bottle cage mounting holes already located on the frame’s downtube. The battery is then locked and secured into the mount using the provided keys.

48V 250W BBS01B BAFANG Mid Drive Motor Conversion Kits 17.5Ah Battery for E-bike

48V 250W Bafang Mid Drive Motor. With an integrated speed sensor, this mid-drive motor, which is compatible with standard bikes, has a rated power of 250W, a reduction ratio of 1: 21.9 and a maximum torque of 80 N. M, providing ideal power for vehicles. Light but strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes and commuter bikes. Wheel Diameter (Inch): Optional. Rated Voltage (DCV): 48. Rated Power (W): 250. Efficiency (%):? 80. Weight (kg): 3.8. Light Drive Capacity (DCV / W): 6 /3(max). Speed Detection Signal (Pulses/Cycle):1. Reduction Ratio:1:21.9. Magnet Poles (2P): 16. Salt Spray Test Standard(h): 96. Hailong 48V 13Ah Specification. Battery Cell:Built in 18650 2600mAh. Battery Weight:4.1KG. Max Constant Discharge Current:25A. Charge voltage:54.6V. Discharge cut off voltage:36.4V. Way of Charge:CC/CV. Cycle Life:1000 times. Protection Function:Over charge, Over discharge, Over current, Short circuit, Balance. Hailong 48V 17.5Ah Specification. Rated Capacity:17.5AH. Battery Cell:Built in Samsung / LG / Panasonic 18650 3500mAh. Battery Weight:4.4KG. Max Constant Discharge Current:30A. Battery cell:LG / Samsung 21700 5000mAh. Array mode:13S4P 52pcs. Operating Voltage:36.4V54.6V. Constant Voltage:2A unit 54.6V. Standard Charge Current: 4A. 1 48V 250W Mid Drive Motor. 1 Pair Crank Arms. 1 Set Thumb Throttle. 1 Set Speed Sensor. 1 4 in 1 Cable. 1 set Lock nuts. 1 XT60 battery extension cable. 1 install accessories for 73mm bottom bracket (Free gift). 1 6V headlight (Free gift). 1 wrench tool (Free gift). 2 36V 250W stickers (Free gift). 1 battery& Eruope charger (optional). Note:If you choose”No battery”, there is no battery comes with the motor kits. Which bike can use this motor kits? Bottom Bracket Width shall be 68-73mm, fit almost 99.99% bike on the market. What is the max voltage this motor can handle?

Electric Bike Left Side Drive Motor Kit Mountain Bike Conversion Custom 250W 24V

Important NOTE: This item is for the bike that uses the hub diameter less than 36mm. This item doesn’t include battery or charger. This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel. Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance. The twist kit includes: 1. 1x 250W 24V brush motor with freewheel 2. 1x Customized sprocket & components 4. 1x Motor controller 5. 1x Mounting plate + bolts 6. 1x Twist throttle (with battery indicator & key switch) The thumb kit includes: 1. 1x Mounting plate + bolt. Electric Bike Left Side Drive Motor Kit Mountain Bike Conversion Custom 250W 24V. This item is for the bike that uses the hub diameter less than 36mm. The twist kit includes. 1x 250W 24V brush motor with freewheel. 1x Customized sprocket & components. 1x Mounting plate + bolts. 1x Twist throttle (with battery indicator & key switch). The thumb kit includes. 1x Wuxing thumb throttle (with battery indicator & switch button). Dieser Artikel ist für ein Fahrrad mit einem Nabendurchmesser von weniger als 50 mm. Dieser Artikel enthält keine Batterie oder Ladegerät. Freilauf des Motors verwenden Wenn sich das Rad dreht, dreht sich der Motor nicht wie bei einem normalen Fahrrad. Dies kann den Widerstand verringern. 1x 250W 24V Bürstenmotor mit Freilauf. 1x Customized Kettenrad und Komponenten. 1x Montageplatte + Schrauben. 1x Twist Gas (mit Batterieanzeige und Schlüsselschalter). 1x Wuxing Daumen Gas (mit Batterieanzeige und Schalter). Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor. Welcome to the ryxtopyyyy! We are committed to providing customers with better and more favorable products! Thank you for your support! France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Electric Bike Left Side Drive Motor Kit Mountain Bike Conversion Custom 250W 24V

Important NOTE: This item is for the bike that uses the hub diameter less than 36mm. This item doesn’t include battery or charger. This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel. Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance. The twist kit includes: 1. 1x 250W 24V brush motor with freewheel 2. 1x Customized sprocket & components 4. 1x Motor controller 5. 1x Mounting plate + bolts 6. 1x Twist throttle (with battery indicator & key switch) The thumb kit includes: 1. 1x Mounting plate + bolt. WELCOME TO MY STORE! This item is for the bike that uses the hub diameter less than 36mm. The twist kit includes. 1x 250W 24V brush motor with freewheel. 1x Customized sprocket & components. 1x Mounting plate + bolts. 1x Twist throttle (with battery indicator & key switch). The thumb kit includes. 1x Wuxing thumb throttle (with battery indicator & switch button). Dieser Artikel ist für ein Fahrrad mit einem Nabendurchmesser von weniger als 50 mm. Dieser Artikel enthält keine Batterie oder Ladegerät. Freilauf des Motors verwenden Wenn sich das Rad dreht, dreht sich der Motor nicht wie bei einem normalen Fahrrad. Dies kann den Widerstand verringern. 1x 250W 24V Bürstenmotor mit Freilauf. 1x Customized Kettenrad und Komponenten. 1x Montageplatte + Schrauben. 1x Twist Gas (mit Batterieanzeige und Schlüsselschalter). 1x Wuxing Daumen Gas (mit Batterieanzeige und Schalter). Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor. Welcome to the ryxtopyyyy! We are committed to providing customers with better and more favorable products! Thank you for your support! France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Electric Bike Left Side Drive Motor Kit Mountain Bike Conversion Custom 250W 24V

Electric Bike Conversion Kit 24V 250W Front Hub Drive Electric Bicycle

Aluminum Alloy Wheel Hub: Aluminum alloy wheel hub effectively improves the edge of the wheel hub. This material is light, high end, comfortable, with strong bearing capacity and has no noise during operation, so that you can fully enjoy the fun of riding. Good Heat Dissipation: The controller shell is made of premium metal material and has slot design, which has good heat dissipation and can avoid thermal overload of internal circuit. Practical Meter: When riding a bike, the multifunction meter will display many useful data on your bike, such as switch buttons, light switches, battery power display and other functions. The meter has a display, which allows you to keep abreast of the situation of your bike. High Performancem Meter: The meter is made of premium ABS plastic, which is light, sturdy and durable, fine in workmanship, good in toughness and waterproof performance, providing better protection for the internal circuit. Widely Applicable: The 24V 250W electric wheel kit is suitable for electric bicycles, DIY Electric bicycles, electric scooters, folding bicycles, etc. And the kit is easy to maintain. The high efficiency can greatly improve the fun of riding, and is suitable for people who like challenges. Item Type: Electric bike conversion kit Material: Stainless steel, aluminum alloy, ABS plastic, metal Weight: Approx. 6650g/234.6oz Motor Wheel Type: Front wheel motor Rated Voltage: 24V Rated Power: 250W Rated Speed: 25-28km/h Motor Speed: 207-270RPM Motor Torque N. M Motor Opening Size (mm):100mm/3.9in Motor Brake Type: V brake, disc brake Motor Wheel Position: Front wheel Motor Torque Arm: M14 Motor Magnetic Steel Height: 22H Number of Magnetic Steel Poles of Motor: 20 Motor Operating Temperature: Minus 20°-45° Waterproof Grade: IP65 Controller Connector Type: Ordinary connector(Except motor waterproof connector) Rated Voltage of Controller: DC 24V Rated Current of Controller: 10A Maximum Current of Controller: 20±1A Controller Speed Setting: 1-4.2V Controller Brake Input: Low level Low Voltage Protection of Controller: DC20±0.5V. 1 x Motor Wheel. 1 x Wire Protection Sleeve. 1 x Connecting Line. 1 x Control Box. 2 x Control Box Accessory. 1 x Power Sensor Wire. 2 x Brake Handle(Including Wire). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

Electric Bike Left Side Drive Motor Mountain Bike Conversion Kit Custom 250W 24V

Electric Bike Left Side Drive Motor Mountain Bike Conversion Kit Custom 250W 24V. This item is for the bike that uses the hub diameter less than 36mm. This item doesn’t include battery or charger. This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel. Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance. The twist kit includes. 1x 250W 24V brush motor with freewheel. 1x Customized sprocket & components. 1x Mounting plate + bolts. 1x Twist throttle (with battery indicator & key switch). The thumb kit includes. 1x Wuxing thumb throttle (with battery indicator & switch button). Dieser Artikel ist für ein Fahrrad mit einem Nabendurchmesser von weniger als 50 mm. Dieser Artikel enthält keine Batterie oder Ladegerät. Freilauf des Motors verwenden Wenn sich das Rad dreht, dreht sich der Motor nicht wie bei einem normalen Fahrrad. Dies kann den Widerstand verringern. 1x 250W 24V Bürstenmotor mit Freilauf. 1x Customized Kettenrad und Komponenten. 1x Montageplatte + Schrauben. 1x Twist Gas (mit Batterieanzeige und Schlüsselschalter). 1x Wuxing Daumen Gas (mit Batterieanzeige und Schalter).

Electric Bicycle Conversion Kit 36V 250W 20 Inch Rear Drive Motor Wheel Kit Hot

Kit Includes: Electric bicycle conversion 20 inch rear drive kit includes 36V 250W front drive 26 inch motor wheel + 15A controller + LCD8S meter + throttle dial + 8 magnetic assist sensor + power off brake lever + controller box + manual. Noise Free Riding: Brushless gear hub DC motor of the aluminum alloy rims effectively enhances the edge of the rims, making it look light, with strong bearing capacity, far more comfort than other types of motors, and achieves noise free riding. LCD8S Meter Function: While cycling, it shows a lot of useful data on your bike, such as battery display, backlight display, headlight display, brake display, temperature, trip time, total trip time, current speed, average speed, maximum speed, total one way distance, 6km/h thrust assist. Good Internal Circuit Protection: High quality metal material controller shell, plus ABS plastic material meter, light, strong and durable, with good heat dissipation function, can prevent the internal circuit, so as to avoid thermal overload. Suitable Scene: Rear drive hub motor kit is suitable for DIY electric bicycles, electric vehicles, electric scooters, folding vehicles, etc. Easy to maintain, with high efficiency, which greatly improves the riding fun, suitable for those who like challenging riders. Item Type: Electric Bicycle Conversion Kit Material: Stainless Steel + Aluminum Alloy + ABS Plastic Motor Wheel Type: Rear Drive Motor Wheel (waterproof connector) Motor Rated Voltage: 36V Motor Rated Power: 250W Motor Speed: About 25-28km/h Motor Speed: 207-270 Rpm Motor Torsion N. M: 29-31.2 N. M Motor Opening Size (mm): Approx. 135-142mm / 5.3-5.6in Motor Matching Controller Current: 15A Motor Rims: P19D Motor Torsion Arm: M14 Brake Disc for Motor: Approx. 160mm / 6.3in Motor Brake Type: V Brake, Disc Brake Universal Motor Wheel Position: Rear Wheel Motor Structure: Brushless Gear Motor Motor Magnet Height: 24H Motor Magnet Pole Number: 20 Motor Operating Temperature: -20-45? Controller Connector Type: Ordinary Connector (except motor waterproof connector) Controller Rated Voltage: DC 36V/48V Controller Rated Current: 7A Controller Maximum Current: 15±1A Controller Speed Setting: 1-4.2V Controller Brake Input: Low Level Controller Low Voltage Protection: DC 30/40±0.5V Controller Wire Color Definition: 1. Black Single Big Head Line: Motor Line (waterproof connector) 2. Red and Black Single Big Head Line: Power Line 3. Red, Blue, Black, Green and Yellow Single Row 5Pin Port: Instrument Line (5pin) 4. Red and Blue Lines (2pcs): Power off Brake Handle Line 5. Red and Black Line: Throttle Dial Line (3pin) 6. Brown, Black and Yellow Line: PAS Power Sensor Line (3pin) LCD8S Meter Function Description: Up Button, Switch Button, Down Button, PAS Tag, Battery Capacity Indication, Power Display, Running Tag, One Way Time, Total Travel Time, Battery Voltage, Brake Display, 6km/h Thrust Assist, Riding Speed , Maximum Speed, Average Speed, Distance Traveled, Total Distance, Backlight and Headlights, Ambient Celsius, Ambient Fahrenheit. 1 x Motor Wheel. 4 x Meter Mounting Bracket Gasket. 2 x Meter Mounting Bracket Screws. 2 x Power Off Brake Lever. 1 x Throttle Dial. 1 x Assist Sensor. 1 x Controller Box. 2 x Controller Box Mounting Rings. 8 x Controller Box Screw. Pay attention to the rims opening. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

BaFang M510 G522 36V 48V 250W Mid Drive Motor Conversion Kits for Ebike

Bafang introduces the new M510 mid-engine as the successor to the proven M500 for robust and demanding applications. As one of the world’s leading manufacturers of e-bike drive systems, Bafang is committed to providing the best motor and system solutions for every category – and this continues its success with the new M510 in the powerful mid-mounted motor category. The strong torque of 95 Nm is the same as that of the M500, but the overall torque curve of the M510 is higher than that of the predecessor model. This is evident at the maximum possible support/maximum possible support of up to 120 rpm. To further improve the efficiency of the performance improvement, the motor, segmented stator has been modified, and the magnesium casing has been designed, reducing the overall weight of the M510 by a full 500 grams (18%) to 2.9 kg (weight M500 = 3.4 kg). Soft start, strong acceleration In addition, the software for startup characteristics has been optimized for smoother and more controlled startup. These characteristics allow better access to short, steep curves or steep slopes. With excellent top performance, the acceleration is powerful and as usual! Nimble and sensitive Because it is on steep climbs or tight corners that it is important that the motor releases the right power with precise precision. Thanks to the high sensitivity of the torque sensor, the M510 can absorb the right amount of power and control the right support according to the rider’s pedaling force. With this performance range, the M510 mid-engine is ideal for performance-oriented use, whether in the bike park or when conquering technically demanding uphill passes! In addition to the lighter construction, the mid-engine comes with improved water resistance, a 12V light module and integrated connections, among others. Additionally, the M510 is chain guard compatible, has the same motor mounts as the M500/M410, and offers a hidden speed sensor mounting option. The M510 motor is compatible with most products in the Bafang product portfolio. M510 – Powerful, compact, lightweight and dynamic The Bafang M510 is a revised version of the predecessor M500 we covered here last year. Weight has been reduced by 18%, while power output has been increased by another 20%. Bafang250w M510 Packing list including. 1.36/48V 250W Mid-Drive Motor: 1 pc. DPC245 Display + Operation Button: 1 pc. Motor cover (AC M02 or AC M04): 1 pcs. FIXATION PARTS: 1 pcs. Waterproof Quick Release Wires(EB-Bus waterproof cable): 1 pc. Speed Detecting Sensor + Magnet: 1 pc. 34T or 36T Chain wheel: 1 pc. Left Crank+ Right Crank: each 1 pc. BASH GUARD(BG G520A or BG G520B): 1 pcs.

14Ah Battery 500C Display 250W Mid-Drive E-Bike Conversion Kit

BBS01B 36V 250W Mid-Drive Electric Bike Conversion Kit. Is the perfect choice for a flawless yet cost-effective Electric Bike. Bafang is renowned for producing motors that are regarded as the very best in the conversion world. Their motors are waterproof for all riding conditions, internally lubricated with sealed casings, and contain a nylon gear for a silent, yet exquisite ride every time! The 250w motor is best suited for U. Use as this is the legal riding limit. The integrated speed sensor and pedal assistance recognises and aids manual output to boost your ride by up to 15mph. Five pedal assistance modes are available, so you can conquer the toughest of rides. This motor weighs approximately 4kg and is designed to fit bottom brackets with a length between 68mm – 73mm (2.68 – 2.87). If you have a Fat Bike, with a 100mm – 120mm bottom bracket length, get in touch with us, as you will require an axle extension. We specialise in crafting custom wiring looms with extended, braided cables tailored specifically for trikes, ensuring cable protection along the adjustable boom. Your trike’s unique needs deserve special attention, and we’re here to provide it! The inner diameter of the bottom bracket should be no less than 33.5mm. More information can be found about bike compatibility on our Bike Information page. Bafang 36V 250W Mid Drive Motor (With XT60 Battery Connector), GRIDE 14Ah Li-Ion Battery. (With XT60 Battery Connector), Battery Frame Mount, Velcro Cable Strap, Keys, 2A Power Adaptor (UK Plug), 500C LCD. Display, Thumb Throttle, E-Brakes, (Can Upgrade to Brake Sensors for Either Hydraulic Brakes or Integrated Shifters), Speed Sensor & Magnet, EB-BUS (1T4) Cable, Cranks, Chainring, Chainguard, Bottom Bracket Installation Tool, All Mounting Hardware Inc. 73mm BB Spacer for Larger Bottom Brackets. This kit’s display (500C) offers the following; Power Indicator, Pedal Assistance Mode 0-5, Speed Display & Lever Indicator, Battery Indicator, Headlight Indicator, Mileage Indicator, Brake Indicator, Error Code Detection & Riding Timer. Our batteries guarantee reliability and sustained performance in all conditions to ensure you get the most efficient ride every time. This battery will cover an approximate 45-mile range and has a display to show battery percentage. Each battery is complete with a USB socket for charging devices on the go. The battery mount is installed onto the bike using the bottle cage mounting holes already located on the frame’s downtube. The battery is then locked and secured into the mount using the provided keys. Mileage Range: Approximately 45 miles. Battery Dimensions: 365mm Length x 80mm Width. Charging Cut-Off Voltage: 42V. Discharging Cut-Off Voltage: 28V. Max Charging Current: 2A. Charging Temperature: 0°C – 45°C. Discharging Temperature: -20°C – 55°C.

May 2025
M	T	W	T	F	S	S
« Apr
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31