bafang
BAFANG 36V/48V 250With500With750With1000W UART Version Mid Drive Kits, BBS01B BBS02B B
Electric bike motor mid drive motor kit conversion kit for 68mm bottom bracket mountain bike, road bike, commuter bike. Mid Drive Motor Kit for Bafang BBS01B BBS02B BBS HD. Mid Drive motor 48V 1000W. Universal Compatible:BAFANG BBS01B BBS02B BBSHD Mid drive motor ebike conversion kit is compatible with mountain bike, road bike, commuter bike etc. Suitable for lower bracket diameter 34 mm, standard turret JIS 68 mm. Powerful motor: Mid drive motor BBSHD max torque up to 160 N. Top speed can reach 25km/h. This mid drive motor has excellent climbing performance. Three driving modes: Three shifting modes: pure electric mode, power-assisted mode, manpower mode. 3 modes meet your different needs and give you different experience effects. Packing list: Mid motor 48V 1000W, C18 display (9 levels pedal assist & automatic backlight), brake lever, thumb throttle, cranks, speed sensor, 1T4 cable, screws. Note: Bafang BBS motors can be installed on most commercially available bicycles with standard frames, but it is important to ensure that the frame has sufficient space for the motor and to check the compatibility of the mounting before ordering.
BAFANG 36V250W Mid Drive Motor DIY Ebike Electric Bicycle Conversion Kits 68MM
The price you see is the final price. Free repair or replacement in case of any quality issues. Upgrade: Experience enhanced performance with the upgraded IRFB3077 mosfets controller. Four Riding Modes: Choose from pure electric mode, human riding model, power assistance, and push models. Enjoy the flexibility of easily switching between 4 working modes. Easy Installation: Effortlessly install this mid-drive motor into your electric bicycle using just a few tools. Remove the crankset and center shaft, then use the provided installation tools for a seamless setup. Compatibility: This kit is compatible with a wide range of bikes, including mountain bikes, road bikes, racing bikes, and more, with a bottom bracket size of 68-73mm. 36V250W Mid Drive Motor Specification. Bafang Model: M315 MM G340.250. Max Speed with Pedal Assistance: 30.5km/h. No Load Speed (RPM): 83±7. Load Speed (RPM): 78±7. PAS Sensor: Speed Sensor. Reduction Ratio: 1 : 21.9. Motor Operation Temperature: -20? -45? Bafang Controller: Integrated Inside the Motor. Bracket Bottom Length: 68mm (The bottom bracket shall be 68-73mm). Net Motor Weight: 4.3kg. 1 Mid Drive Motor. 1 Pair 44T Chainwheel (Default). 1 Set Thumb Throttle. 1 Set Speed Sensor. 1 4 to 1 Cable. 1 6V Headlight (Free). 1 Wrench Tool (Free). 2 36V250W Stickers (Free). If you choose the battery option, it comes with a charger. If you choose “no battery, ” please note that the motor kit does not include a battery. Note: Gear shift sensor is not included. Q: How do I know if this mid-drive motor will fit my bike? A: This 68mm mid-drive motor is compatible with bikes having a bottom bracket width of 68mm (2.68 inches) to 73mm (2.87 inches). 100mm mid-drive motor is compatible with bikes having a bottom bracket width of 89-105mm. The inner diameter of the bracket should be 34-36mm. Q: How do I choose between brake levers and brake sensors? A: If you have hydraulic brakes or prefer to use your own brake sensors, you can choose brake sensors. They can connect directly with your brakes for seamless functionality. Q: Can I install the motor as soon as it arrives? A: Before installation, please follow the steps in the manual to test the motor’s functionality. We are specialized in manufacturing electric bike parts, such us Mid motors, Hub Motors, lithium batteries, and DIY conversion kits. We has a good cooperative relation with BAFANG company. All the items we sell are 100% genuine and authorized. With an experienced and professional team, we have exported our products to many countries and regions around the world, especially America and Europe. Our products enjoy a good reputation among our customers. We make sure all of our items are brand new and in excellent condition before dispatch. We are willing to satisfy all customers. We are willing to respond to your inquiry in 24 hours usually. Your recognition is our motivation in developing our small company and improving our service for each customer. Our aim is to provide Level Customer Service. Your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfied. 48V BAFANG Mid Drive Motor BBS02B 68mm Ebike Electric Bicycle Conversion kit. Bafang 48V500W Rear Wheel Hub Motor Disc Brake Electric Bike for Cassette DC Kit. Bafang Rear Hub Motor 48V 26″ 27.5″700C Cassette Disc Brake Conversion Kit. 48V Bafang Motor BBSHD BBS03 Electric Bicycle Conversion Kits DIY Ebike. Bafang Display BAFANG Mid Drive Motor/ Hub Motor Bicycle screen T1 touch eBike. EBike Brake Sensor For BAFANG BBS01 BBS02 BBSHD Motor Power Cut Off Brake Levers.
48V 250 Bafang Mid Drive Motor Kit BBS01B 68mm-73mm DIY Ebike Conversion Kits
The motor kits do not include a battery. Eco-friendly and high-performance, the Bafang Mid Motor Kit is designed for electric bikes, featuring a Bafang Mid Drive Motor with a nominal voltage of 48V and a rated power of 250W. 48V250W68mm Mid Drive Motor Specification. Bafang Model: M315 MM G340.250. Max speed with Pedal Assistance: 30.5km/h. No Load Speed(RPM) :87±5. Load Speed(RPM): 83±5. Load Speed: 30.5km/h. PAS SENSOR : Speed Sensor. Reduction Ratio: 1 : 21.9. Motor Operation Temperature:-20? -45? Bafang Controller: Integrated Inside the Motor. Bracket bottom length: 68mm(The bottom bracket shall be 68-73mm). Net Motor Weight: 4.3kg. 1 Headlight 1 Wrench 1 Crank Puller 1 Bottom Bracket Remover 1 User Manual. Note: The motor is designed to fit bottom brackets with a width of. And an inner diameter of. Please note that the motor kit does not include screws for 73mm bottom bracket. Choosing Brake Levers or Sensors. We send the brake levers default. The kit is compatible with or without brake sensors. For standard cable actuated brakes, select brake levers. For adapting existing brakes, especially hydraulic ones, magnet sensors are available. Additional costs may apply for remote area deliveries. Local return addresses will be provided for convenience. Your satisfaction is our priority. We appreciate your 5-star feedback and are here to assist you with any issues.
Bafang BBS02B 36V 500W mid drive kit with DPC14 display
Complete retrofit mid drive kit without battery. This kit is a reliable, lightweight choice for a mid drive motor. Doesn’t overtax the chain and driveline like higher power mid drives can. Makes the most of your battery power if you just want a boost up the hills. E-brake handles for cable brakes.
36V250W68-73MM BAFANG Mid Drive Motor Engine BBS01B Ebike Conversion Kits 80N. M
Position: Mid drive motor. PAS sensor: Speed?? sensor. Reduction ratio: 1:21.9. 1 36V250W BBS01B Bafang Mid Drive Motor 68mm. 1 Pair Brake Lever or Brake sensor. 1 Pair 44T Chainwheel (Default). 1 Set Thumb Throttle. 1 Set Speed Sensor. 1 4 to 1 Cable. 1 Wrench Tool (Free). Universal fit for most bikes. The adaptable BAFANG mid-motor kit integrates seamlessly with bottom brackets with a length of 68-73 mm and an inner diameter of 33.5-36 mm and complies with JIS standards. Note: 73 mm bolts are not included.
BAFANG 36V48V250W68-73MM Mid Drive Motor DIY Electric Bike Conversion Kit
The price you see is the final price. Free repair or replacement in case of any quality issues. Upgrade: Experience enhanced performance with the upgraded IRFB3077 mosfets controller. Four Riding Modes: Choose from pure electric mode, human riding model, power assistance, and push models. Enjoy the flexibility of easily switching between 4 working modes. Easy Installation: Effortlessly install this mid-drive motor into your electric bicycle using just a few tools. Remove the crankset and center shaft, then use the provided installation tools for a seamless setup. Compatibility: This kit is compatible with a wide range of bikes, including mountain bikes, road bikes, racing bikes, and more, with a bottom bracket size of 68-73mm. 48V250W68mm Mid Drive Motor Specification. Bafang Model: M315 MM G340.250. Max speed with Pedal Assistance: 25km/h. No Load Speed(RPM) :87±5. Load Speed(RPM): 83±5. PAS SENSOR : Speed Sensor. Reduction Ratio: 1 : 21.9. Motor Operation Temperature:-20? -45? Bafang Controller: Integrated Inside the Motor. Bracket bottom length: 68mm(The bottom bracket shall be 68-73mm). Net Motor Weight: 4.3kg. 1 48V250W68mm Mid Drive Motor. 1 Pair 44T Chainwheel(Default) – Let us know if you want 36T/42T. 1 Set Thumb Throttle. 1 Set Speed Sensor. 1 4 to 1 Cable. 1 Bottom Bracket Remover. If you choose the battery option, it comes with a charger. If you choose “no battery, ” please note that the motor kit does not include a battery. Note: Gear shift sensor is not included. Q: How do I know if this mid-drive motor will fit my bike? A: The inner diameter of the bracket should be 34-36mm. The 68mm mid-drive motor is compatible with bikes having a bottom bracket width of 68-73mm. For 73mm bottom brackets, we’ll provide extra installation accessories. Please leave a note for the 73mm bottom bracket. Q: How do I choose between brake levers and brake sensors? A: If you have hydraulic brakes or prefer to use your own brake sensors, you can choose brake sensors. They can connect directly with your brakes for seamless functionality. Q: Can I install the motor as soon as it arrives? A: Before installing the motor, please refer to the manual and follow the instructions to connect the motor and verify its normal operation. Please ensure not to disconnect any connections while the power supply is still active.
48V250W68-73MM BAFANG Mid Drive Motor DIY BBS01B Electric Ebike Conversion Kits
Position: Mid drive motor. PAS sensor: Speed?? sensor. Reduction ratio: 1:21.9. 1 Mid Drive Motor. 1 Pair Brake Lever or Brake sensor. 1 Pair 44T Chainwheel (Default). 1 Set Thumb Throttle. 1 Set Speed Sensor. 1 4 to 1 Cable. 1 Wrench Tool (Free). Universal fit for most bikes. The adaptable BAFANG mid-motor kit integrates seamlessly with bottom brackets with a length of 68-73 mm and an inner diameter of 33.5-36 mm and complies with JIS standards. Note: 73 mm bolts are not included.
Bafang M510 36V 250W Mid Drive Motor Conversion Kits for Ebike CAN Display
Bafang M510 36V 250W Mid Drive Motor Conversion Kits for Ebike CAN Display. Bafang introduces the new M510 mid-engine as the successor to the proven M500 for robust and demanding applications. Committed to providing top motor and system solutions for every e-bike category. The M510 continues Bafang’s success in the powerful mid-mounted motor category. Support up to 120 rpm. Magnesium casing and segmented stator redesign reduces weight by 18% (500g lighter). Weight: 2.9 kg (was 3.4 kg in M500). Smoother startup with optimized software. Excellent for steep climbs and tight curves. High-sensitivity torque sensor adapts support based on pedaling force. Perfect for performance-oriented rides – bike parks and uphill technical trails. Integrated 12V light module and connections. Hidden speed sensor mounting option. Compatible with most products in the Bafang product portfolio. 20% power increase over the M500. Bafang 250W M510 Packing List. 36/48V 250W Mid-Drive Motor. VD618 Display + Operation Button. Waterproof Quick Release Wires (EB-Bus). Speed Detecting Sensor + Magnet. We’ll do our best to serve you.
48V 52V 1000W Bafang G510 M620 Mid Drive Motor Conversion Kit with DPC18/DPC010
Bafang G510 M620 Mid Drive Motor Conversion Kit 48V 52V 1000W for eBike Bicycle. Performance? The motor continuously scans relevant information with a frequency of up to 80 kHz via a torque sensor and two speed sensors, all of which are highly sensitive. The maximum torque of the motor is more than 160 Nm, the motor works virtually silently. The ultra drive for powerful off-road acceleration. Enjoy the challenging driving experience with ultimate power. DPC18 Disply? The Bafang HMI with high-contrast LCD display provides all important information at a glance and is easy to read even in direct sunlight. The additional power can be individually controlled by five support levels. The user interface is easy to read and intuitive to use. The HMI is protected against contact and the ingress of water and dirt and complies with protection class IP 65. Special installation? After welding, the frame adapter must be heat-treated together with the bicycle frame to ensure the dimensions of the drive unit, concentricity and position of the mounting hole. Align the three mounting holes of the drive unit with the mounting holes in the bicycle frame and mount the drive unit on the bicycle frame. Power: 48V/52V 1000W Construction: Gear drive Max Torque: 160 N. Net Motor Weight: 5.3kg Shaft standard: ISIS. Display Working Temperature:-20-80 C. Efficiency? 80 Pedal sensor: Speed and Torque Integrated Noise Grade. 1 48V 1000W or 52V 1000W Motor. 1 Pair Brakes Levers. 1 Pair 44T Chainwheel. 1 Set Thumb Throttle. 1 Set Speed Sensor. 14 in 1 Cable. We are specialized in manufacturing electric bike parts, such us Mid motors, Hub Motors, Controller, Lithium batteries, and DIY conversion kits. We has a good cooperative relation with BAFANG company. All the items we sell are 100% genuine and authorized. With an experienced and professional team, we have exported our products to many countries and regions around the world, especially America and Europe. Ny return that is NOT defective or NOT received in error, is the responsibility of the customer. Communication is the best way to solve problems. We try our best to make sure every customer is completely satisfied.