For Ford Custom Mk2 Awning Rail & Drive Away Connect Kit Swb/black

THE UK’S LARGEST VAN ACCESSORY SPECIALIST. UK’s LEADING Distributor. FOR FORD CUSTOM MK2 AWNING RAIL & DRIVE AWAY CONNECT KIT SWB/BLACK. FORD TRANSIT CUSTOM MK2 AWNING RAIL & DRIVEAWAY CONNECT KIT BUNDLE 2024> The ultimate “All-in-One” connection solution specifically developed for the all-new Ford Transit Custom MK2 (2024 onwards). Includes a Drive-Away Kit (6mm to 6mm) paired with a precision-engineered C-profile awning rail. Designed for “Drive-Away” functionality-easily detach your van from the awning in seconds to go exploring or run errands. Fully compatible with Outdoor Revolution, Kampa, and VASTYLE awnings, or any brand utilizing a standard 6mm Kador bead. Low-profile rail design is compatible with most roof bars; simply install the rail underneath your existing roof rack feet. Specification Rail Material: High-Grade Extruded Aluminium Rail Finish: Available in Anodised Silver or Powder Coated Satin Black Driveaway Kit: 6mm to 6mm (4-Metre Length) Installation: Bolt-on using existing factory roof points (No Drilling) Compatibility: All Drive-Away Awnings with 6mm Kador Bead. Vehicle Fitment: Ford Transit Custom MK2 SWB (L2) 2024 onwards. Contents: 1x Vehicle Specific C-Profile Awning Rail (Silver or Black) 1x Driveaway Kit (4m Kador Strip & Figure-of-8 Sections). Please note – The Kador strip is supplied as a 4m length and the Figure-of-8 in sections; both are designed to be trimmed to size by the installer to perfectly match your specific van’s roof length. How does it fit? The rail aligns with the factory-threaded holes on your roof. Simply remove the blanking plastic screws, position the rail, and bolt down. If you have roof bars, the rail sits underneath the feet. Can I still use my Roof Bars? These rails are designed to be low-profile. You can place the awning rail over the mounting holes and then bolt your roof bar feet directly through the rail into the van for a secure “sandwich” fitment. Will this fit a Pop-Top roof? This specific bolt-on kit is designed for vans with standard factory roofs. If you have a pop-top, the mounting points are usually obstructed or removed, so we do not recommend this kit for those vehicles. Can I pick them up? We have been UK distributors for many of the world’s finest 4×4, Van & MPV accessories manufacturers since 1988. At Palm Automotive VanStyle we have over 25 years experience in sourcing for 4×4, Van & MPV accessories from some of the finest factories in the world. You can be assured of good service and at a great price! A VAT receipt will be sent out with the goods. Want to return something? SIGN UP FOR OUR NEWSLETTER. THE UK’s LARGEST VAN SPECIALISTS. LONG ESTABLISHED VAN ACCESSORY SUPPLIES.

For Ford Custom Mk1 Awning Rail & Drive Away Connect Kit Swb/silver

THE UK’S LARGEST VAN ACCESSORY SPECIALIST. UK’s LEADING Distributor. FOR FORD CUSTOM MK1 AWNING RAIL & DRIVE AWAY CONNECT KIT SWB/SILVER. Includes a Drive-Away Kit (6mm to 6mm) paired with a precision-engineered C-profile awning rail. Designed for a 100% “No-Drill” installation by utilising the factory-threaded roof mounting points on the MK1 chassis. Specifically engineered to allow for “Drive-Away” functionality-simply slide the Kador strip out to leave your awning standing while you explore. Supplied with a 4m Kador strip and multi-section Figure-of-8, allowing you to trim the kit to the exact length of your van’s roofline. Contents: 1x MK1 Specific C-Profile Awning Rail (Silver or Black) 1x Driveaway Kit (4m Kador Strip & Figure-of-8 Sections). The Kador strip and Figure-of-8 are designed to be trimmed to size by the installer to ensure a perfect, tidy fit to your specific roof length. How does it fit? The rail aligns with the factory-threaded holes on the roof of your MK1. Simply remove the plastic blanking screws, position the rail with the provided seals, and bolt it down for a secure, professional finish. Can I still use my Roof Bars? The rail is designed to be low-profile so it can be “sandwiched” between the van roof and your roof bar feet. Simply bolt your roof bars directly through the rail into the factory mounting points. Will this fit a Pop-Top roof? This bolt-on kit is specifically for vans with standard factory roofs. Because pop-tops usually obstruct or require the removal of the factory mounting points, this rail will not be compatible. Can I pick them up? We have been UK distributors for many of the world’s finest 4×4, Van & MPV accessories manufacturers since 1988. At Palm Automotive VanStyle we have over 25 years experience in sourcing for 4×4, Van & MPV accessories from some of the finest factories in the world. You can be assured of good service and at a great price! A VAT receipt will be sent out with the goods. Want to return something? SIGN UP FOR OUR NEWSLETTER. THE UK’s LARGEST VAN SPECIALISTS. LONG ESTABLISHED VAN ACCESSORY SUPPLIES.

For Ford Custom Mk2 Awning Rail & Drive Away Connect Kit Lwb/silver

THE UK’S LARGEST VAN ACCESSORY SPECIALIST. UK’s LEADING Distributor. FOR FORD CUSTOM MK2 AWNING RAIL & DRIVE AWAY CONNECT KIT lWB/SILVER. FORD TRANSIT CUSTOM MK2 AWNING RAIL & DRIVEAWAY CONNECT KIT BUNDLE 2024> The ultimate “All-in-One” connection solution specifically developed for the all-new Ford Transit Custom MK2 (2024 onwards). Includes a Drive-Away Kit (6mm to 6mm) paired with a precision-engineered C-profile awning rail. Designed for “Drive-Away” functionality-easily detach your van from the awning in seconds to go exploring or run errands. Fully compatible with Outdoor Revolution, Kampa, and VASTYLE awnings, or any brand utilizing a standard 6mm Kador bead. Low-profile rail design is compatible with most roof bars; simply install the rail underneath your existing roof rack feet. Specification Rail Material: High-Grade Extruded Aluminium Rail Finish: Available in Anodised Silver or Powder Coated Satin Black Driveaway Kit: 6mm to 6mm (4-Metre Length) Installation: Bolt-on using existing factory roof points (No Drilling) Compatibility: All Drive-Away Awnings with 6mm Kador Bead. Vehicle Fitment: Ford Transit Custom MK2 LWB (L2) 2024 onwards. Contents: 1x Vehicle Specific C-Profile Awning Rail (Silver or Black) 1x Driveaway Kit (4m Kador Strip & Figure-of-8 Sections). Please note – The Kador strip is supplied as a 4m length and the Figure-of-8 in sections; both are designed to be trimmed to size by the installer to perfectly match your specific van’s roof length. How does it fit? The rail aligns with the factory-threaded holes on your roof. Simply remove the blanking plastic screws, position the rail, and bolt down. If you have roof bars, the rail sits underneath the feet. Can I still use my Roof Bars? These rails are designed to be low-profile. You can place the awning rail over the mounting holes and then bolt your roof bar feet directly through the rail into the van for a secure “sandwich” fitment. Will this fit a Pop-Top roof? This specific bolt-on kit is designed for vans with standard factory roofs. If you have a pop-top, the mounting points are usually obstructed or removed, so we do not recommend this kit for those vehicles. Can I pick them up? We have been UK distributors for many of the world’s finest 4×4, Van & MPV accessories manufacturers since 1988. At Palm Automotive VanStyle we have over 25 years experience in sourcing for 4×4, Van & MPV accessories from some of the finest factories in the world. You can be assured of good service and at a great price! A VAT receipt will be sent out with the goods. Want to return something? SIGN UP FOR OUR NEWSLETTER. THE UK’s LARGEST VAN SPECIALISTS. LONG ESTABLISHED VAN ACCESSORY SUPPLIES.

FORD FOCUS MK2 1.8 TDCi DIESEL 2005-2011 CONVERSION FLYWHEEL + CLUTCH KIT & CSC

ER MANCHESTER – ORDER UP TO 3PM MON-FRI FOR SAME DAY DISPATCH. FOR 5-SPEED GEARBOX MODELS ONLY.. SEE OUR SEPERATE LISTING FOR 6-SPEED GEARBOX MODELS. DOS-SF1044054 (=SF1044 + CSC054530)-DOS… BRAND NEW FLYWHEEL CONVERSION KIT. INCLUDING SOLID MASS FLYWHEEL + CLUTCH KIT & CSC HYDRAULIC CLUTCH SLAVE CYLINDER. 1.8 TDCi 115bhp DIESEL MODELS WITH 5-SPEED GEARBOX.. YEARS 2005 – 2010. FORD FOCUS MK2 (DA DB DS) 1.8 TDCi 115bhp DIESEL MODELS WITH 5-SPEED GEARBOX.. YEARS 2005 – 2011. DOES NOT FIT ANY OTHER MODELS OR ENGINES THAN THOSE QUOTED ABOVE. >>>>>>> SEE OUR SEPERATE LISTINGS FOR 2010 ONWARDS MK3 FOCUS AND C-MAX MODELS. A 4 PIECE KIT CONTAINING SOLID CONVERSION FLYWHEEL, CLUTCH PLATE, CLUTCH COVER, CSC & BOLT PACK. EXACT KIT SHOWN IN LISTING PHOTOS. 24 MONTHS /24,000 MILES GUARANTEE. With central slave cylinder.

For Ford Custom Mk1 Awning Rail & Drive Away Connect Kit Lwb/black

THE UK’S LARGEST VAN ACCESSORY SPECIALIST. UK’s LEADING Distributor. FOR FORD CUSTOM MK1 AWNING RAIL & DRIVE AWAY CONNECT KIT LWB/BLACK. Includes a Drive-Away Kit (6mm to 6mm) paired with a precision-engineered C-profile awning rail. Designed for a 100% “No-Drill” installation by utilising the factory-threaded roof mounting points on the MK1 chassis. Specifically engineered to allow for “Drive-Away” functionality-simply slide the Kador strip out to leave your awning standing while you explore. Supplied with a 4m Kador strip and multi-section Figure-of-8, allowing you to trim the kit to the exact length of your van’s roofline. Contents: 1x MK1 Specific C-Profile Awning Rail (Silver or Black) 1x Driveaway Kit (4m Kador Strip & Figure-of-8 Sections). The Kador strip and Figure-of-8 are designed to be trimmed to size by the installer to ensure a perfect, tidy fit to your specific roof length. How does it fit? The rail aligns with the factory-threaded holes on the roof of your MK1. Simply remove the plastic blanking screws, position the rail with the provided seals, and bolt it down for a secure, professional finish. Can I still use my Roof Bars? The rail is designed to be low-profile so it can be “sandwiched” between the van roof and your roof bar feet. Simply bolt your roof bars directly through the rail into the factory mounting points. Will this fit a Pop-Top roof? This bolt-on kit is specifically for vans with standard factory roofs. Because pop-tops usually obstruct or require the removal of the factory mounting points, this rail will not be compatible. Can I pick them up? We have been UK distributors for many of the world’s finest 4×4, Van & MPV accessories manufacturers since 1988. At Palm Automotive VanStyle we have over 25 years experience in sourcing for 4×4, Van & MPV accessories from some of the finest factories in the world. You can be assured of good service and at a great price! A VAT receipt will be sent out with the goods. Want to return something? SIGN UP FOR OUR NEWSLETTER. THE UK’s LARGEST VAN SPECIALISTS. LONG ESTABLISHED VAN ACCESSORY SUPPLIES.

For Ford Custom Mk1 Awning Rail & Drive Away Connect Kit Swb/black

THE UK’S LARGEST VAN ACCESSORY SPECIALIST. UK’s LEADING Distributor. FOR FORD CUSTOM MK1 AWNING RAIL & DRIVE AWAY CONNECT KIT SWB/BLACK. Includes a Drive-Away Kit (6mm to 6mm) paired with a precision-engineered C-profile awning rail. Designed for a 100% “No-Drill” installation by utilising the factory-threaded roof mounting points on the MK1 chassis. Specifically engineered to allow for “Drive-Away” functionality-simply slide the Kador strip out to leave your awning standing while you explore. Supplied with a 4m Kador strip and multi-section Figure-of-8, allowing you to trim the kit to the exact length of your van’s roofline. Contents: 1x MK1 Specific C-Profile Awning Rail (Silver or Black) 1x Driveaway Kit (4m Kador Strip & Figure-of-8 Sections). The Kador strip and Figure-of-8 are designed to be trimmed to size by the installer to ensure a perfect, tidy fit to your specific roof length. How does it fit? The rail aligns with the factory-threaded holes on the roof of your MK1. Simply remove the plastic blanking screws, position the rail with the provided seals, and bolt it down for a secure, professional finish. Can I still use my Roof Bars? The rail is designed to be low-profile so it can be “sandwiched” between the van roof and your roof bar feet. Simply bolt your roof bars directly through the rail into the factory mounting points. Will this fit a Pop-Top roof? This bolt-on kit is specifically for vans with standard factory roofs. Because pop-tops usually obstruct or require the removal of the factory mounting points, this rail will not be compatible. Can I pick them up? We have been UK distributors for many of the world’s finest 4×4, Van & MPV accessories manufacturers since 1988. At Palm Automotive VanStyle we have over 25 years experience in sourcing for 4×4, Van & MPV accessories from some of the finest factories in the world. You can be assured of good service and at a great price! A VAT receipt will be sent out with the goods. Want to return something? SIGN UP FOR OUR NEWSLETTER. THE UK’s LARGEST VAN SPECIALISTS. LONG ESTABLISHED VAN ACCESSORY SUPPLIES.

FORD S-MAX 1.8 TDCi DIESEL 2006-2014 NEW CONVERSION FLYWHEEL + CLUTCH KIT & CSC

ER MANCHESTER – ORDER UP TO 3PM MON-FRI FOR SAME DAY DISPATCH. FOR 5-SPEED GEARBOX MODELS ONLY.. SEE OUR SEPERATE LISTING FOR 6-SPEED GEARBOX MODELS. BRAND NEW FLYWHEEL CONVERSION KIT. INCLUDING SOLID MASS FLYWHEEL + CLUTCH KIT & CSC HYDRAULIVC CLUTCH SLAVE CYLINDER. FORD GALAXY & S-MAX (WA6) 1.8 TDCi 100/125bhp DIESEL MODELS SWITH 5-SPEED GEARBOX.. YEARS 2006 – 2014. DOES NOT FIT ANY OTHER MODELS OR ENGINES THAN THOSE QUOTED ABOVE. A 4 PIECE KIT CONTAINING SOLID CONVERSION FLYWHEEL, CLUTCH PLATE, CLUTCH COVER, CSC & BOLT PACK. EXACT KIT SHOWN IN LISTING PHOTOS. 24 MONTHS /24,000 MILES GUARANTEE. With central slave cylinder.

FORD MONDEO MK4 1.8 TDCi DIESEL 2007-2015 CONVERSION FLYWHEEL + CLUTCH KIT & CSC

ER MANCHESTER – ORDER UP TO 3PM MON-FRI FOR SAME DAY DISPATCH. FOR 1.8 TDCi 5-SPEED GEARBOX MODEL ONLY. BRAND NEW FLYWHEEL CONVERSION KIT. INCLUDING SOLID MASS FLYWHEEL + CLUTCH KIT & CSC HYDRAULIC CLUTCH SLAVE CYLINDER. FORD MONDEO MK4 (BA7) 1.8 TDCi 100/125bhp DIESEL MODELS WITH 5-SPEED GEARBOX.. YEARS 2007 – 2015. DOES NOT FIT ANY OTHER MODELS OR ENGINES THAN THOSE QUOTED ABOVE. EXCLUDING MODELS WITH ECO START/STOP FUNCTION. A 4 PIECE KIT CONTAINING SOLID CONVERSION FLYWHEEL, CLUTCH PLATE, CLUTCH COVER, CSC & BOLT PACK. EXACT KIT SHOWN IN LISTING PHOTOS. 24 MONTHS /24,000 MILES GUARANTEE. With central slave cylinder.

FORD GALAXY 1.8 TDCi DIESEL 2006-2014 NEW CONVERSION FLYWHEEL + CLUTCH KIT & CSC

1930 Ford Model A T5 Transmission Conversion

M	T	W	T	F	S	S
« Jul
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30
31

Drive Conversion Kit

ford