07_13_Silverado_Sierra_2_piece_conversion_drive_shaft_kit_4l60_stock_height_01_cgs

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60 stock height

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60 stock height
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60 stock height

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60 stock height
This is a Brand New 2 Piece Drive Shaft Conversion from an aluminum Drive shaft to Steel 2 piece. This kit is for stock height vehicles (0-4 lowered). If you need the lowered version of this kit, you can find it here. As you may know the stock aluminum drive shafts are 5 diameter and when you lower a 2007 to 2013 Silverado or Sierra the drive shaft. Will rub and eventually cut the shaft into two pieces. We have designed a two piece conversion shaft that will fit your truck – needs to be a 2wd crew cab shortbed 1500. This Drive Shaft kit will also help the critical speed of the drive shaft if the truck has been re-geared or has high speed vibrations. This kit will include a brand new 3 diameter steel two piece drive shaft with carrier bearing and universal joints – The drive shaft will be built and fully balanced. The cross member is included – it will require drilling holes threw frame to mount cross member. This drive shaft kit will give more clearance for lowered trucks. Truck specs for this shaft to fit. 4 speed transmission (4l60e) Transmission yoke OD – 1.886″ Crew cab/ shortbed 5’8″ bed- 143.5″ wheel base or Extended cab 6′ bed – 143.5″ wheel base. This kit is designed to be bolted in there is no welding required. You will have to drill holes to mount the cross member. Installation time is about 1-3 hours depending on your experience level. This is the compete kit with hardware. Complete driveshaft with transmission slip yoke installed. Drive shaft is fully balanced. Carrier bearing is installed on driveshaft. All universal joints installed. Complete cross member kit with hardware (bolts and nuts). Contact must be made within 48 hours of sale. We do not guarantee transit times. A return request must be received within 14 days of sale. You will receive an RGA number upon approval for the return request. Will be accepted for return if it has been installed, attempted to be installed or used. Be received within 7 days of RGA being issued. Of every month ONLY. The item “07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60 stock height” is in sale since Friday, February 15, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Universal Joints & Driveshafts”. The seller is “pi399″ and is located in Bakersfield, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Brand: Performance Driveline
  • Manufacturer Part Number: 07/13 4l60e stock height

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60 stock height
07_13_Silverado_Sierra_2_piece_conversion_drive_shaft_kit_4l60e_High_HP_01_dsos

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP
This is a Brand New 2 Piece Drive Shaft Conversion from an aluminum Drive shaft to Steel 2 piece. THIS IS A HIGH PERFORMANCE SHAFT! THIS SHAFT HANDLES UP TO 800 H/P AND COMES WITH A CHROMOLY, BILLET SLIP YOKE THAT HANDLES UP TO 1200 H/P! This kit is for stock height vehicles! As you may know the stock aluminum drive shafts are 5 diameter and when you lower a 2007 to 2013 Silverado or Sierra the drive shaft. Will rub and eventually cut the shaft into two pieces. We have designed a two piece conversion shaft that will fit your truck – needs to be a 2wd crew cab shortbed 1500. This Drive Shaft kit will also help the critical speed of the drive shaft if the truck has been re-geared or has high speed vibrations. This kit will include a brand new 3 diameter steel two piece drive shaft with carrier bearing and universal joints – The drive shaft will be built and fully balanced. The cross member is included – it will require drilling holes threw frame to mount cross member. This drive shaft kit will give more clearance for lowered trucks. Truck specs for this shaft to fit. 4 speed transmission (4l60e) Transmission yoke OD – 1.500″ Crew cab/ shortbed 5’8″ bed- 143.5″ wheel base or Extended cab 6′ bed – 143.5″ wheel base. This kit is designed to be bolted in there is no welding required. You will have to drill holes to mount the cross member. Installation time is about 1-3 hours depending on your experience level. This is the compete kit with hardware. Complete driveshaft with transmission slip yoke installed. Drive shaft is fully balanced. Carrier bearing is installed on driveshaft. All universal joints installed. Complete cross member kit with hardware (bolts and nuts). Contact must be made within 48 hours of sale. We do not guarantee transit times. A return request must be received within 14 days of sale. You will receive an RGA number upon approval for the return request. Will be accepted for return if it has been installed, attempted to be installed or used. Be received within 7 days of RGA being issued. Of every month ONLY. The item “07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP” is in sale since Friday, March 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Universal Joints & Driveshafts”. The seller is “pi399″ and is located in Bakersfield, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Manufacturer Part Number: 07/13 6l80e high horsepower lowered
  • Brand: Performance Driveline

07-13 Silverado Sierra 2 piece conversion drive shaft kit 4l60e- High HP

Incoming search terms:

  • https://driveconversionkit com/2021/03/29/07-13-silverado-sierra-2-piece-conversion-drive-shaft-kit-4l60e-high-hp/
07_13_Silverado_Sierra_2_piece_conversion_drive_shaft_kit_6L80E_LOWERED_High_HP_01_qfz

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6L80E LOWERED High HP

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6L80E LOWERED High HP

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6L80E LOWERED High HP
This is a Brand New 2 Piece Drive Shaft Conversion from an aluminum Drive shaft to Steel 2 piece. THIS IS A HIGH PERFORMANCE SHAFT! THIS SHAFT HANDLES UP TO 800 H/P AND COMES WITH A CHROMOLY, BILLET SLIP YOKE THAT HANDLES UP TO 1200 H/P! This kit is for stock height vehicles! If you need the lowered version of this kit, you can find it here. As you may know the stock aluminum drive shafts are 5 diameter and when you lower a 2007 to 2013 Silverado or Sierra the drive shaft. Will rub and eventually cut the shaft into two pieces. We have designed a two piece conversion shaft that will fit your truck – needs to be a 2wd crew cab shortbed 1500. This Drive Shaft kit will also help the critical speed of the drive shaft if the truck has been re-geared or has high speed vibrations. This kit will include a brand new 3 diameter steel two piece drive shaft with carrier bearing and universal joints – The drive shaft will be built and fully balanced. The cross member is included – it will require drilling holes threw frame to mount cross member. This drive shaft kit will give more clearance for lowered trucks. Truck specs for this shaft to fit. 6 speed transmission (6l80e) Transmission yoke OD – 1.886″ Crew cab/ shortbed 5’8″ bed- 143.5″ wheel base or Extended cab 6′ bed – 143.5″ wheel base. This kit is designed to be bolted in there is no welding required. You will have to drill holes to mount the cross member. Installation time is about 1-3 hours depending on your experience level. This is the compete kit with hardware. Complete driveshaft with transmission slip yoke installed. Drive shaft is fully balanced. Carrier bearing is installed on driveshaft. All universal joints installed. Complete cross member kit with hardware (bolts and nuts). Contact must be made within 48 hours of sale. We do not guarantee transit times. A return request must be received within 14 days of sale. You will receive an RGA number upon approval for the return request. Will be accepted for return if it has been installed, attempted to be installed or used. Be received within 7 days of RGA being issued. Of every month ONLY. The item “07-13 Silverado Sierra 2 piece conversion drive shaft kit 6L80E LOWERED High HP” is in sale since Wednesday, March 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Universal Joints & Driveshafts”. The seller is “pi399″ and is located in Bakersfield, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine.
  • Brand: Performance Driveline
  • Manufacturer Part Number: 07/13 6l80e lowered high horsepower

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6L80E LOWERED High HP
07_13_Silverado_Sierra_2_piece_conversion_drive_shaft_kit_6l80e_High_HP_01_ncb

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- High HP

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- High HP

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- High HP
This is a Brand New 2 Piece Drive Shaft Conversion from an aluminum Drive shaft to Steel 2 piece. THIS IS A HIGH PERFORMANCE SHAFT! THIS SHAFT HANDLES UP TO 800 H/P AND COMES WITH A CHROMOLY, BILLET SLIP YOKE THAT HANDLES UP TO 1200 H/P! This kit is for lowered vehicles! If you need the stock height version of this kit, you can find it here. As you may know the stock aluminum drive shafts are 5 diameter and when you lower a 2007 to 2013 Silverado or Sierra the drive shaft. Will rub and eventually cut the shaft into two pieces. We have designed a two piece conversion shaft that will fit your truck – needs to be a 2wd crew cab shortbed 1500. This Drive Shaft kit will also help the critical speed of the drive shaft if the truck has been re-geared or has high speed vibrations. This kit will include a brand new 3 diameter steel two piece drive shaft with carrier bearing and universal joints – The drive shaft will be built and fully balanced. The cross member is included – it will require drilling holes threw frame to mount cross member. This drive shaft kit will give more clearance for lowered trucks. Truck specs for this shaft to fit. 6 speed transmission (6l80e) Transmission yoke OD – 1.886″ Crew cab/ shortbed 5’8″ bed- 143.5″ wheel base or Extended cab 6′ bed – 143.5″ wheel base. This kit is designed to be bolted in there is no welding required. You will have to drill holes to mount the cross member. Installation time is about 1-3 hours depending on your experience level. This is the compete kit with hardware. Complete driveshaft with transmission slip yoke installed. Drive shaft is fully balanced. Carrier bearing is installed on driveshaft. All universal joints installed. Complete cross member kit with hardware (bolts and nuts). Contact must be made within 48 hours of sale. We do not guarantee transit times. A return request must be received within 14 days of sale. You will receive an RGA number upon approval for the return request. Will be accepted for return if it has been installed, attempted to be installed or used. Be received within 7 days of RGA being issued. Of every month ONLY. The item “07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- High HP” is in sale since Wednesday, March 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Universal Joints & Driveshafts”. The seller is “pi399″ and is located in Bakersfield, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Manufacturer Part Number: 07/13 6l80e high horsepower lowered
  • Brand: Performance Driveline

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- High HP
07_13_Silverado_Sierra_2_piece_conversion_drive_shaft_kit_6l80e_stock_height_01_zbdu

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- stock height

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- stock height
07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- stock height

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- stock height
This is a Brand New 2 Piece Drive Shaft Conversion from an aluminum Drive shaft to Steel 2 piece. This is for STOCK HEIGHT VEHICLES! If you have a lowered vehicle, (5-10), you can find it here. This kit will eliminate the critical speed issue you have with your stock shaft. As you may know the stock aluminum drive shafts are 5 diameter and when you lower a 2007 to 2013 Silverado or Sierra the drive shaft. Will rub and eventually cut the shaft into two pieces. We have designed a two piece conversion shaft that will fit your truck – needs to be a 2wd crew cab shortbed 1500. This Drive Shaft kit will also help the critical speed of the drive shaft if the truck has been re-geared or has high speed vibrations. This kit will include a brand new 3 diameter steel two piece drive shaft with carrier bearing and universal joints – The drive shaft will be built and fully balanced. The cross member is included – it will require drilling holes threw frame to mount cross member. This drive shaft kit will give more clearance for lowered trucks. Truck specs for this shaft to fit. 6 speed transmission (6l80e) Transmission yoke OD – 1.886″ Crew cab/ shortbed 5’8″ bed- 143.5″ wheel base or Extended cab 6′ bed – 143.5″ wheel base. This kit is designed to be bolted in there is no welding required. You will have to drill holes to mount the cross member. Installation time is about 1-3 hours depending on your experience level. This is the compete kit with hardware. Complete driveshaft with transmission slip yoke installed. Drive shaft is fully balanced. Carrier bearing is installed on driveshaft. All universal joints installed. Complete cross member kit with hardware (bolts and nuts). Contact must be made within 48 hours of sale. We do not guarantee transit times. A return request must be received within 14 days of sale. You will receive an RGA number upon approval for the return request. Will be accepted for return if it has been installed, attempted to be installed or used. Be received within 7 days of RGA being issued. Of every month ONLY. The item “07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- stock height” is in sale since Thursday, March 23, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Universal Joints & Driveshafts”. The seller is “pi399″ and is located in Bakersfield, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Manufacturer Part Number: 07/13 6l80e stock height
  • Brand: Performance Driveline

07-13 Silverado Sierra 2 piece conversion drive shaft kit 6l80e- stock height