UK_Road_Legal_36V_Switchable_250_500_watt_E_bike_mid_drive_motor_conversion_kit_01_twki

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
PCC – Lingbei LB-01 Premium Range. Switchable 36 volt 250 / 500 watt E-bike mid drive motor conversion kit. Unlike most mid drive conversions for sale in the UK, this powerful and road legal mid drive conversion kit has been built to our specification. It also carries CE / ROHS certification. It is very light weight (3.8 kgs) and extremely quiet. This is genuine UK stock and is available for immediate dispatch. We source our products worldwide from reputable suppliers and import them into the UK before we offer them for sale. This is a comprehensive kit allowing you to convert your existing bike into an exciting E-bike. Just add a battery and you have all that you need. As E-bike riders ourselves, we test and evaluate all of our products before adding them to our range. This particular kit has proved to be great for climbing hills and offers great range. It is torque and cadence sensing to give a great riding experience. One of the big advantages with this kit is the much larger nylon drive gear. This is a much stronger gear than that of other motors on the market. Mid motor kits are very versatile and capable of being fitted to a bike with any wheel size. You will need to remove the front derailleur mechanism as it is no longer required. Once fitted you will find that your bike is not only very quick, but is still relatively light and manoeverable when compared to a bike with a hub motor. The centre of gravity remains very low and this helps the bike to handle and perform well on all types of surface. Bottom Bracket size 68 – 73mm. This is the most common bottom bracket size in the UK, but please check that your bikes bottom bracket is this width. Power Output – 250 / 500 watts. As the power limit for on road use in the UK is limited to 250 watts, we have specified this kit to be switchable into two modes. Accessed via the colour display, it gives 250 watts for on road use and 500 watts for off road use. With a reduction rate of 1:21.9 and 90nm of torque available, this motor will climb hills extremely well. In 250 watt mode, the speed is limited to a UK legal 15.5 mph. In 500 watt mode, you are able to set your own desired top speed. All motors are labelled as 250 watts. Once switched into 500 watt mode, this motor is quite capable of achieving speeds in excess of 22 mph. A larger chainring will allow you to ride quickly without a ridiculous pedal cadence. Most kits have a 42 tooth chainring and in our opinion are geared a little too low. With a 3.2 inch colour screen and an anodized alloy frame with separate control buttons. This display has proved to be a big improvement over the LCD screens offered with most kits. The separate buttons allow you to make changes easily on the move as they can be mounted in a convenient position. With a sturdy construction and crystal clear display, this unit not only looks very smart but is built to last. We include a thumb throttle with the kit. To use this or not as the motor will operate normally without it. Many kits will include a twist throttle. It is still a grey area with legality in the UK but the thumb throttle is the only accepted way to remain legal. Twist throttles are definitely not legal. This allows you to set the desired pedal assistance via the C800 display. If you wish to work harder, or increase your battery range, then set the assistance level lower. If you wish to take a leisurely ride, or climb some steep hills easily, then set it higher. You have a choice of 5 levels in 250 watt mode and a further 5 levels in 500 watt mode. This is another item that other sellers don’t usually include. The sensor cuts power to the motor, for a split second, as you shift gears. It will save a lot of chain and sprocket wear as it allows a very smooth shift. More powerful motors will cause excessive wear and damage to the drivetrain when shifting gears without a gearshift sensor. We are waiting for stock of gearshift sensors to arrive and will send the sensor as soon as they are here (expected any day and kit will function perfectly without it). We include a pair of ebrake levers for cable operated brakes. These will cut power to the motor when you apply the brakes. If you have hydraulic brakes there are brake sensors available online. If your brake levers have built-in gear shifters then this kit can be used without the ebrake levers and will operate normally. LB-01 Motor – Complete with mounting hardware. 2 x aluminium pedal cranks. Gearshift sensor (to be sent separately as soon as in stock). 2 x Ebrake levers. Waterproof main wiring harness. Please note that this listing does not include the 36 volt battery. However we have specified this kit at 36 volts to reduce battery cost. We can supply a battery for this kit also, so please see out other listings. We want you to have the best E-bike experience possible. The item “UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit” is in sale since Monday, May 4, 2020. This item is in the category “Sporting Goods\Cycling\Bike Components & Parts\Electric Bike Components”. The seller is “pcc-ebikes” and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • For Bike Type: Universal
  • Electric Bike Part Type: Conversion Kit
  • Colour: Black
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Compatible Battery Type: Lithium Ion (Li-Ion)
  • Type: Conversion Kit
  • For E-Bike Type: Universal
  • Brand: LIngbei – PCC
  • Voltage: 36 V

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK_Road_Legal_36V_Switchable_250_500_watt_E_bike_mid_drive_motor_conversion_kit_01_nonk

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
This kit is part of our Standard range of Switchable kits. The PCC – Lingbei MM28.500. K ROAD LEGAL with this. S witchable 36 volt 250 / 500 watt E-bike mid drive motor conversion kit. Switch this kit into 250 watt mode to stay road legal in the UK and then change easily to 500 watt mode for some exciting off road performance. This is a quality kit allowing you to convert your existing bike into an exciting E-bike. Just add a battery and you have all that you need. As E-bike riders ourselves, we test and evaluate all of our products before adding them to our range. This particular kit has proved to be great for climbing hills and offers great range. It is torque and cadence sensing to give a great riding experience. One of the big advantages with this motor is the much larger nylon final drive gear. This is a much stronger gear than that of other motors on the market. This kit has proved to be extremely popular, reliable and very versatile. Unlike most mid drive conversions available in the UK, this powerful and road legal mid drive conversion kit has been built to our specification. It carries full CE / ROHS certification. It is very light weight (3.8 kgs) and extremely quiet. This is genuine UK stock and is available for immediate dispatch. We source our products worldwide from reputable manufacturers and import them into the UK before we offer them for sale. Mid motor kits are very versatile and capable of being fitted to a bike with any wheel size. You will need to remove the front derailleur mechanism and standard bottom bracket as they are no longer required. Once fitted you will find that your bike is very quick, but is still light and manoeverable when compared to a bike fitted with a hub motor. The centre of gravity remains very low and this helps the bike to handle and perform well on all types of surface. Bottom Bracket size 68 – 73mm. This is the most common bottom bracket size in the UK, but please check that your bikes bottom bracket is within this width range. Power Output – Switchable 250 / 500 watts. As the legal power limit for on road use in the UK is 250 watts, we have specified this kit to be switchable into two modes. Accessed via the LCD display, it can be switched to 250 watts for on road use and 500 watts for off road use. With a reduction rate of 1:21.9 and 90nm of torque available, this motor will climb hills extremely well and gives a very natural feel. In 250 watt mode, the speed is limited to a UK road legal 15.5 mph. In 500 watt mode, you are able to set your own desired top speed. This is exactly the same motor that is used in our premium kit. Our “Standard” range allows you to decide which options you wish to add, such as throttle and gearshift sensor. With a 4 inch LCD screen, an anodized alloy frame and separate control buttons. This display has proved to be a big improvement over the LCD screens offered with most kits. The separate buttons allow you to make changes easily on the move as they can be mounted in a convenient position. With a sturdy construction and crystal clear display, this unit not only looks very smart but is built to last. We include a pair of ebrake levers for cable operated brakes. These will cut power to the motor when you apply the brakes. If your brake levers have built-in gear shifters then this kit can be used without the ebrake levers and will operate normally. Another option is to fit one of the levers to the left side as the front shifter is no longer required. A larger chainring will allow you to ride quickly without a ridiculous pedal cadence. Most kits have a 42 tooth chainring and in our opinion are geared a little too low. Using the full range of your rear cassette gears, you will have a great range of gearing from low to high. 5 Levels of pedal assist. This allows you to set the desired pedal assistance via the C800 display. If you wish to exercise harder, or increase your battery range, then set the assistance level lower. If you wish to take a leisurely ride, or climb some steep hills easily, then set it higher. You have a choice of 5 levels in 250 watt mode and a further 5 levels in 500 watt mode. The pedal assist levels can be changed easily on the move, so that you can lower the level when power is not needed and then raise it as you approach a hill. You can choose to add this to your kit but the motor will operate normally without it. A thumb throttle is much easier on your wrist when compared to a twist throttle. These are listed separately here. The sensor cuts power to the motor, for a split second, as you shift gears. It will save a lot of chain and sprocket wear as it allows a very smooth shift. More powerful motors can cause excessive wear and damage to the drivetrain when shifting gears on full power without a gearshift sensor. We do suggest that if you choose not to add this sensor, you avoid full throttle gearshifts as this could damage the chain and freewheel. 1 x LB-01 Motor – Complete with mounting hardware. 1 x C600 LCD display. 1 x 46 tooth chainring. 2 x Aluminium pedal cranks. 1 x Speed sensor. 2 x Ebrake levers. 1 x Waterproof main wiring harness. 1 x Motor fitting tool. Please note that this listing does not include the 36 volt battery. However we have specified this kit at 36 volts to reduce battery cost. Please see our other listings for batteries, thumb throttles, gearshift sensors etc. We want you to have the best E-bike experience possible. The item “UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit” is in sale since Monday, May 4, 2020. This item is in the category “Sporting Goods\Cycling\Bike Components & Parts\Electric Bike Components”. The seller is “pcc-ebikes” and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • For Bike Type: Universal
  • Electric Bike Part Type: Conversion Kit
  • Colour: Black
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Type: Conversion Kit
  • Brand: LIngbei – PCC

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
E_Rad_1000_Watt_MID_Drive_Conversion_Kit_Video_Review_01_pcj
E_Rad_350_Watt_MID_Drive_Conversion_Kit_Video_Review_01_wy
Bafang_1000_Watt_E_Bike_Conversion_Kit_Walkaround_01_ba
UK_Road_Legal_36V_Switchable_250_500_watt_E_bike_mid_drive_motor_conversion_kit_01_kxt

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
This kit is part of our Standard range of Switchable kits. The PCC – Lingbei MM28.500. K ROAD LEGAL with this. S witchable 36 volt 250 / 500 watt E-bike mid drive motor conversion kit. Switch this kit into 250 watt mode to stay road legal in the UK and then change easily to 500 watt mode for some exciting off road performance. This is a quality kit allowing you to convert your existing bike into an exciting E-bike. Just add a battery and you have all that you need. As E-bike riders ourselves, we test and evaluate all of our products before adding them to our range. This particular kit has proved to be great for climbing hills and offers great range. It is torque and cadence sensing to give a great riding experience. One of the big advantages with this motor is the much larger nylon final drive gear. This is a much stronger gear than that of other motors on the market. This kit has proved to be extremely popular, reliable and very versatile. Unlike most mid drive conversions available in the UK, this powerful and road legal mid drive conversion kit has been built to our specification. It carries full CE / ROHS certification. It is very light weight (3.8 kgs) and extremely quiet. This is genuine UK stock and is available for immediate dispatch. We source our products worldwide from reputable manufacturers and import them into the UK before we offer them for sale. Mid motor kits are very versatile and capable of being fitted to a bike with any wheel size. You will need to remove the front derailleur mechanism and standard bottom bracket as they are no longer required. Once fitted you will find that your bike is very quick, but is still light and manoeverable when compared to a bike fitted with a hub motor. The centre of gravity remains very low and this helps the bike to handle and perform well on all types of surface. Bottom Bracket size 68 – 73mm. This is the most common bottom bracket size in the UK, but please check that your bikes bottom bracket is within this width range. Power Output – Switchable 250 / 500 watts. As the legal power limit for on road use in the UK is limited to 250 watts, we have specified this kit to be switchable into two modes. Accessed via the LCD display, it can be switched to 250 watts for on road use and 500 watts for off road use. With a reduction rate of 1:21.9 and 90nm of torque available, this motor will climb hills extremely well and gives a very natural feel. In 250 watt mode, the speed is limited to a UK road legal 15.5 mph. In 500 watt mode, you are able to set your own desired top speed. With a 4 inch LCD screen, an anodized alloy frame and separate control buttons. This display has proved to be a big improvement over the LCD screens offered with most kits. The separate buttons allow you to make changes easily on the move as they can be mounted in a convenient position. With a sturdy construction and crystal clear display, this unit not only looks very smart but is built to last. We include a pair of ebrake levers for cable operated brakes. These will cut power to the motor when you apply the brakes. If your brake levers have built-in gear shifters then this kit can be used without the ebrake levers and will operate normally. Another option is to fit one of the levers to the left side as the front shifter is no longer required. A larger chainring will allow you to ride quickly without a ridiculous pedal cadence. Most kits have a 42 tooth chainring and in our opinion are geared a little too low. Using the full range of your rear cassette gears, you will have a great range of gearing from low to high. 5 Levels of pedal assist. This allows you to set the desired pedal assistance via the C800 display. If you wish to exercise harder, or increase your battery range, then set the assistance level lower. If you wish to take a leisurely ride, or climb some steep hills easily, then set it higher. You have a choice of 5 levels in 250 watt mode and a further 5 levels in 500 watt mode. The pedal assist levels can be changed easily on the move, so that you can lower the level when power is not needed and then raise it as you approach a hill. You can choose to add this to your kit but the motor will operate normally without it. A thumb throttle is much easier on your wrist when compared to a twist throttle. These are listed separately here. The sensor cuts power to the motor, for a split second, as you shift gears. It will save a lot of chain and sprocket wear as it allows a very smooth shift. More powerful motors can cause excessive wear and damage to the drivetrain when shifting gears on full power without a gearshift sensor. We do suggest that if you choose not to add this sensor, you avoid full throttle gearshifts as these can damage the chain and freewheel. 1 x LB-01 Motor – Complete with mounting hardware. 1 x C600 LCD display. 1 x 46 tooth chainring. 2 x Aluminium pedal cranks. 1 x Speed sensor. 2 x Ebrake levers. 1 x Waterproof main wiring harness. 1 x Motor fitting tool. Please note that this listing does not include the 36 volt battery. However we have specified this kit at 36 volts to reduce battery cost. Please see our other listings for batteries. We want you to have the best E-bike experience possible. The item “UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit” is in sale since Tuesday, February 4, 2020. This item is in the category “Sporting Goods\Cycling\Bike Components & Parts\Electric Bike Components”. The seller is “pcc-ebikes” and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • Type: Conversion Kit
  • For Bike Type: Universal
  • Brand: LIngbei – PCC
  • Electric Bike Part Type: Conversion Kit

UK Road Legal 36V Switchable 250/500 watt E-bike mid drive motor conversion kit
PCC_LB_01_36_volt_Switchable_250_500_watt_E_bike_mid_drive_conversion_kit_01_yw

PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit

PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit

PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit
Now back in stock – PCC – Lingbei LB-01. Switchable 36 volt 250 / 500 watt E-bike mid drive motor conversion kit. Unlike most mid drive conversions for sale in the UK, this powerful and road legal mid drive conversion kit has been built to our specification. It also carries CE / ROHS certification. It is very light weight (3.8 kgs) and extremely quiet. This is genuine UK stock and is available for immediate dispatch. We source our products worldwide from reputable suppliers and import them into the UK before we offer them for sale. This is a comprehensive kit allowing you to convert your existing bike into an exciting E-bike. Just add a battery and you have all that you need. As E-bike riders ourselves, we test and evaluate all of our products before adding them to our range. This particular kit has proved to be great for climbing hills and offers great range. It is torque and cadence sensing to give a great riding experience. One of the big advantages with this kit is the much larger nylon drive gear. This is a much stronger gear than that of other motors on the market. This kit has proved to be extremely popular and very versatile. Mid motor kits are very versatile and capable of being fitted to a bike with any wheel size. You will need to remove the front derailleur mechanism as it is no longer required. Once fitted you will find that your bike is not only very quick, but is still relatively light and manoeverable when compared to a bike with a hub motor. The centre of gravity remains very low and this helps the bike to handle and perform well on all types of surface. Bottom Bracket size 68 – 73mm. This is the most common bottom bracket size in the UK, but please check that your bikes bottom bracket is this width. Power Output – 250 / 500 watts. As the power limit for on road use in the UK is limited to 250 watts, we have specified this kit to be switchable into two modes. Accessed via the colour display, it gives 250 watts for on road use and 500 watts for off road use. With a reduction rate of 1:21.9 and 90nm of torque available, this motor will climb hills extremely well. In 250 watt mode, the speed is limited to a UK legal 15.5 mph. In 500 watt mode, you are able to set your own desired top speed. Once switched into 500 watt mode, this motor is quite capable of achieving speeds in excess of 22 mph. A larger chainring will allow you to ride quickly without a ridiculous pedal cadence. Most kits have a 42 tooth chainring and in our opinion are geared a little too low. With a 3.2 inch colour screen and an anodized alloy frame with separate control buttons. This display has proved to be a big improvement over the LCD screens offered with most kits. The separate buttons allow you to make changes easily on the move as they can be mounted in a convenient position. With a sturdy construction and crystal clear display, this unit not only looks very smart but is built to last. We include a thumb throttle with the kit. To use this or not as the motor will operate normally without it. Many kits will include a twist throttle. It is still a grey area with legality in the UK but the thumb throttle is the only accepted way to remain legal. Twist throttles are definitely not legal. This allows you to set the desired pedal assistance via the C800 display. If you wish to work harder, or increase your battery range, then set the assistance level lower. If you wish to take a leisurely ride, or climb some steep hills easily, then set it higher. You have a choice of 5 levels in 250 watt mode and a further 5 levels in 500 watt mode. This is another item that other sellers don’t usually include. The sensor cuts power to the motor, for a split second, as you shift gears. It will save a lot of chain and sprocket wear as it allows a very smooth shift. More powerful motors will cause excessive wear and damage to the drivetrain when shifting gears without a gearshift sensor. We include a pair of ebrake levers for cable operated brakes. These will cut power to the motor when you apply the brakes. If you have hydraulic brakes there are brake sensors available online. If your brake levers have built-in gear shifters then this kit can be used without the ebrake levers and will operate normally. LB-01 Motor – Complete with mounting hardware. 2 x aluminium pedal cranks. 2 x Ebrake levers. Waterproof main wiring harness. Please note that this listing does not include the 36 volt battery. However we have specified this kit at 36 volts to reduce battery cost. We want you to have the best E-bike experience possible. The item “PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit” is in sale since Monday, September 30, 2019. This item is in the category “Sporting Goods\Cycling\Bike Components & Parts\Electric Bike Components”. The seller is “tvrdave1″ and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • Modified Item: No
  • Colour: Black
  • Country/Region of Manufacture: China
  • Type: Conversion Kit
  • For Bike Type: Universal
  • Brand: LIngbei – PCC
  • Electric Bike Part Type: Conversion Kit

PCC LB-01 36 volt Switchable 250/500 watt E-bike mid drive conversion kit

Incoming search terms:

  • Lingbei LB-01
Busettii_VORTEX_mid_drive_36v_500_watt_750W_max_conversion_kit_hill_climber_01_ne

Busettii VORTEX mid drive 36v 500 watt -750W max conversion kit hill climber

Busettii VORTEX mid drive 36v 500 watt -750W max conversion kit hill climber
Busettii VORTEX mid drive 36v 500 watt -750W max conversion kit hill climber

Busettii VORTEX mid drive 36v 500 watt -750W max conversion kit hill climber
Busettii 36v mid drive 500 watt. We bought them for warehouse. Taken from new bikes. Conversion kit included : motor + panel + brakes + throttle + PAS + sprocket + bolts. Kit & frame included : 26 super heavy duty alum disc frame + motor kit + crank set + chain guard + chain+ battery seat with battery rail. Wheel set and some bike parts not included. The item “Busettii VORTEX mid drive 36v 500 watt -750W max conversion kit hill climber” is in sale since Saturday, May 19, 2018. This item is in the category “Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components”. The seller is “apar_ebikes” and is located in Venice, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Switzerland, Norway, Croatia, Iceland.
  • Brand: vortex
  • Voltage: 36v

Busettii VORTEX mid drive 36v 500 watt -750W max conversion kit hill climber
PCC_LB_01_Switchable_36_volt_250_500_watt_E_bike_mid_drive_motor_kit_01_xib

PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit

PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit

PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
PCC – Lingbei LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit. Unlike most mid drive conversions for sale in the UK, this powerful and road legal mid drive conversion kit has been built to our specification. It also carries CE / ROHS certification. It is very light weight (3.8 kgs) and extremely quiet. This is genuine UK stock and is available for immediate dispatch. We source our products worldwide from reputable suppliers and import them into the UK before we offer them for sale. This is a comprehensive kit allowing you to convert your existing bike into an exciting E-bike. Many other suppliers offer kits for sale, but when they are delivered, people discover that they are far from a complete kit. We trade in an honest an open way. Mid motor kits are very versatile and capable of being fitted to a bike with any wheel size. You will need to remove the front derailleur mechanism as it is no longer required. Once fitted you will find that your bike is not only very quick, but is still relatively light and manoeverable when compared to a bike with a hub motor. The centre of gravity remains very low. Bottom Bracket size 68 – 73mm. This is the most common bottom bracket size in the UK, but please check that your bikes bottom bracket is this width. Power Output – 250 / 500 watts. As the power limit for on road use in the UK is limited to 250 watts, we have specified this kit to be switchable into two modes. Accessed via the colour display, it gives 250 watts for on road use and 500 watts for off road use. With a reduction rate of 1:21.9 and 90nm of torque available, this motor will climb hills extremely well. In 250 watt mode, the speed is limited to a UK legal 15.5 mph. In 500 watt mode, you are able to set your own desired top speed. Once switched into 500 watt mode, this motor is quite capable of achieving speeds in excess of 22 mph. A larger chainring will allow you to ride quickly without a ridiculous pedal cadence. Most kits have a 42 tooth chainring and in our opinion are geared too low. With a 3.2 inch colour screen and an anodized alloy frame with separate control buttons. This display has proved to be a big improvement over the LCD screens offered with most kits. The separate buttons allow you to make changes easily on the move as they can be mounted in a convenient position. With a sturdy construction and crystal clear display, this unit not only looks very smart but is built to last. We include a thumb throttle with the kit. To use this or not as the motor will operate normally without it. Many kits will include a twist throttle. It is still a grey area with legality in the UK but the thumb throttle is the only accepted way to remain legal. Twist throttles are definitely not legal. This allows you to set the desired pedal assistance via the C800 display. If you wish to work harder, or increase your battery range, then set the assistance level lower. If you wish to take a leisurely ride, or climb some steep hills easily, then set it higher. You have a choice of 5 levels in 250 watt mode and a further 5 levels in 500 watt mode. This is another item that other sellers don’t usually include. The sensor cuts power to the motor, for a split second, as you shift gears. It will save a lot of chain and sprocket wear as it allows a very smooth shift. More powerful motors will cause excessive wear and damage to the drivetrain when shifting gears without a gearshift sensor. We include a pair of ebrake levers for cable operated brakes. These will cut power to the motor when you apply the brakes. If you have hydraulic brakes there are brake sensors available online. If your brake levers have built-in gear shifters then this kit can be used without the ebrake levers and will operate normally. LB-01 Motor – Complete with mounting hardware. 2 x aluminium pedal cranks. 2 x Ebrake levers. Waterproof main wiring harness. Please note that this listing does not include the 36 volt battery. However we have specified this kit at 36 volts to reduce battery cost. We will be listing a battery for this kit also so please see out other listings. We want you to have the best E-bike experience possible. The item “PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit” is in sale since Sunday, June 16, 2019. This item is in the category “Sporting Goods\Cycling\Bike Components & Parts\Electric Bike Components”. The seller is “tvrdave1″ and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • Colour: Black
  • Country/Region of Manufacture: China
  • Type: Conversion Kit
  • For Bike Type: Universal
  • Brand: LIngbei – PCC
  • Electric Bike Part Type: Conversion Kit

PCC LB-01 Switchable 36 volt 250 / 500 watt E-bike mid drive motor kit
8fun_Bbs02_Video_Review_750_Watt_MID_Drive_Electric_Bike_Kit_01_vqn