Ebike conversion kit 2OOOW 26″ 27.5″ Rear Wheel Motor twist throttle LCD Display. We will actively handle after-sales. The conversion kit is compatible with Disc and V brake and comes with LCD display. The conversion kit is the best quality and relative low weight, the motor is sleek and silent making it easy to pedal even without power. 48V 2000W power Brushless geared hub motor with 45A controller. Adjustable 5 level intelligent pedal assist with. LCD display shows battery level and pedal assistance settings, speedometer, odometer, wattage, speed setting etc. Brake Levers cut off the power supply to the motor safely. High Efficient pedal assist sensor. Main technical parameters of the controller. Maximum power: 2000W; 4. Waterproof basic water protection to IP64. The kit includes everything you need (except battery) and is easily installed to your bike following the instruction manual provided. Basic tools and mechanical knowledge will be required. 1x wheel with 2000W motor 1x 45A controller 1x Pedal Assist Crank Sensor 1x Thumb Twist Throttle 1x Pair of Brake Levers 1x LCD Meter. WHAT SIZE KIT DO I NEED? If you look on your tyre’s, this will tell you if your bike has 26″ or 27.5″ wheels. Alternatively you can look up your bike’s make and model online. Remember that a’wheel’ is a rim and a tyre together We have other wheel size’s available please see our other listings. Battery Storage and Maintenance. When the battery pack to be long-term stored, charge the battery pack to about 50% capacity(after discharging completely, charge for 2 – 3h at 2A), store in dry and ventilated place, charge 1 to 2 hour for every 3 months. The battery pack and charger should be stored in clean, dry and ventilated place, avoid. Contacting with corrosive materials and be away from fire and heat. In the maintenance process, please do not disassemble the battery pack, forbid to remove any cell in the battery pack. (Can ask us for video if you don’t know how to install).