12 Rear Wheel 48V 1000W Brushless Hub Motor with Swinagrm for Scooter Dirt Bike

Build or replace a compatible rear-drive system with this complete 48V 1000W brushless hub motor wheel assembly and steel rear swingarm. The package combines a 12-inch rear motor wheel with an 80/100-12 off-road tire, reinforced swingarm, hydraulic hand-brake assembly, and mounting components for custom motorcycle and off-road vehicle projects. The rear hub motor is rated at 48V 1000W and features approximately 55-60Nm of torque. It has a rated current of 28A, maximum current of 42A, 10-pole magnet construction, and a 120° Hall sensor angle. Rated speed is approximately 655 ±25 RPM with a 1:5 gear reduction ratio. These specifications are intended for compatible rear-drive applications requiring strong low-speed output. The 12-inch rear wheel is fitted with an 80/100-12 off-road tire and includes a rear disc brake interface. The motor assembly uses a 175mm axle length and plug-in phase wiring. Motor wiring must be installed on the LEFT side. Confirm your original wiring arrangement and axle dimensions before installation. The included rear swingarm is constructed from welded steel with reinforced side structures and measures approximately 440mm / 17.3 inches overall. It is designed around compatible 10-12 inch rear wheel configurations and provides mounting locations for the rear wheel, suspension components, brake system, and related hardware. 1 × 48V 1000W rear brushless hub motor wheel. 1 × 80/100-12 off-road tire and 12-inch wheel assembly. 1 × Steel rear swingarm. 1 × Hydraulic hand-brake assembly. 2 × 6001 bearings. 1 × Oil/hydraulic brake mounting bracket. M8 and M6 flange bolts. M10 × 195mm flange bolt. M10 × 45mm flange bolt. 10-12 Inch Rear Wheel Projects. Important Fitment Information: This is a component assembly intended for compatible custom applications. Before installation, compare the swingarm length, axle spacing, mounting points, wheel dimensions, brake position, bearing specifications, wiring configuration, and available clearance with your vehicle. Professional installation is recommended for custom drivetrain and brake work.

36V 500W Front Drive Unit Set Optional Battery Brushless Geared Front Drive Unit

Business, Office & Industrial. 36V 500W Front Drive Unit Set Optional Battery Brushless Geared Front Drive Unit. Product Type? : This bike part is a 36V 500W front hub drive unit kit designed for riders who want to convert a standard bike into an electric bike kit with a front-wheel drive setup. Drive Unit Performance? : The geared hub drive unit set delivers strong power and effortless assistance, helping the wheel start easier and making daily riding feel more responsive on city roads and mild climbs. Included Controls? : The package includes an LED880 display, controller, throttle, brake levers, and pedal assist parts, giving you a complete front hub drive unit kit with the key riding controls in single set. Practical Benefits? : As a ready-to-use hub drive unit kit, it helps reduce pedal effort and supports a more comfortable commute, especially when you want steadier speed and less fatigue on longer rides. Intended Use? : This electric bike kit is built for front-wheel conversion projects, making it a practical bike part for DIY upgrades, replacement builds, and riders who want a more capable assisted ride. Please pay what you win in 7 days. Because the unpaid dispute will not be closed automatically, and we may ignore it. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. We are committed to give you the best customer service possible. Please let us work on the issues. We’d like to settle any problem in a friendly manner. Due to the difference of time zone between Hong Kong and your location, sometimes the answer will be delayed. It’s just take you 1 minute. People always bought together with.

36V 500W Front Drive Unit Set Optional Battery Brushless Geared Front Drive Unit

Home, Furniture & DIY. 36V 500W Front Drive Unit Set Optional Battery Brushless Geared Front Drive Unit. Product Type? : This bike part is a 36V 500W front hub drive unit kit designed for riders who want to convert a standard bike into an electric bike kit with a front-wheel drive setup. Drive Unit Performance? : The geared hub drive unit set delivers strong power and effortless assistance, helping the wheel start easier and making daily riding feel more responsive on city roads and mild climbs. Included Controls? : The package includes an LED880 display, controller, throttle, brake levers, and pedal assist parts, giving you a complete front hub drive unit kit with the key riding controls in single set. Practical Benefits? : As a ready-to-use hub drive unit kit, it helps reduce pedal effort and supports a more comfortable commute, especially when you want steadier speed and less fatigue on longer rides. Intended Use? : This electric bike kit is built for front-wheel conversion projects, making it a practical bike part for DIY upgrades, replacement builds, and riders who want a more capable assisted ride. Please pay what you win in 7 days. Because the unpaid dispute will not be closed automatically, and we may ignore it. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. We are committed to give you the best customer service possible. Please let us work on the issues. We’d like to settle any problem in a friendly manner. Due to the difference of time zone between Hong Kong and your location, sometimes the answer will be delayed. It’s just take you 1 minute. People always bought together with.

36V 500W Front Drive Unit Set PAS Sensor Brushless Geared Front Drive Unit

Product Type? : This bike part is a 36V 500W front hub drive unit kit designed for riders who want to convert a standard bike into an electric bike kit with a front-wheel drive setup. Drive Unit Performance? : The geared hub drive unit set delivers strong power and effortless assistance, helping the wheel start easier and making daily riding feel more responsive on city roads and mild climbs. Included Controls? : The package includes an LED880 display, controller, throttle, brake levers, and pedal assist parts, giving you a complete front hub drive unit kit with the key riding controls in single set. Practical Benefits? : As a ready-to-use hub drive unit kit, it helps reduce pedal effort and supports a more comfortable commute, especially when you want steadier speed and less fatigue on longer rides. Intended Use? : This electric bike kit is built for front-wheel conversion projects, making it a practical bike part for DIY upgrades, replacement builds, and riders who want a more capable assisted ride.

DIY Electric Bike Conversion Kit Brushless Friction Drive Motor Bicycle Booster

This conversion package is very easy to install and remove. The Ebike conversion kit includes all components needed for installation; brushless motor, controller, throttle, clutch, fender, set screws and cable ties. Please note that this electric bike kit does not include batteries and tires! Applicable models: road bike, commuter bike, mountain bike. If the temperature of the controller exceeds 90 centigrade during riding, it will trigger overheating protection, and the power will be cut off, and it will return to normal when the temperature cools down. Note:If your bike tires are deeply treaded, they will slip easily in the rain. Do not recommend to use it in raining day. The modified effect has a lot to do with the bicycle tires, and it also has a lot to do with the hands-on ability. Note:If your bicycle tires are seriously aging, it is re. Commended to replace the tires before installing them! Will wear down the bicycle tires. The effect of the bicycle assistor has a lot to do with the bicycle tires. If your bicycle tires have deep lines, it is recommended to apply a little glass glue to the surface of the tire to increase the contact area, thereby increasing the friction and achieving better results. Bicycles under 16 inches cannot be installed, and 16-26 inch bicycles are suitable for installation, 4.0 tires, tubeless tires, and solid tires are not supported. Applicable battery type and parameters: Lithium Ion (Li-Ion), 24V/36V, 8-15Ah. The Controller must not connect with the battery if do not use. Required battery voltage: 24V/36V. Required battery current: 8-15Ah. Friction wheel material: Plastic+Polyurethane. Battery and charger are not included, please prepare them before using. One Set Of Electric Bike Conversion Kit. How to operate the machine after installation. Comment: the followings are happed after the friction wheel is touched the tire tightly. 1\ It is available to start the motor by touching the speed-switch lightly when the bicycle has a low speed. Please don’t start the motor directly when the bicycle is stopped. 2\ Please touch the speed-switch lightly for accelerating when the bicycle’s speed is stable. 3\The user doesn’t need to ride the bicycle and the motor can drive the bicycle, the max speed can be 25km/h. 4\The user can ride the bicycle and use the motor together to drive the bike for upslope. Please check with y. We are not responsible. OR, you may choose to have a replacement. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Please DON’T leave negative or neutral feed.

36V 500W Front Drive Unit Set High Power Brushless Geared Front Drive Unit

36V250W Hub Motor Electric Bike Conversion Kit for 26700C 27.5 Wheel Brushless

36V250W2627.5700C Rear Wheel Hub Motor Ebike Conversion Kit Cassette Brushless

DC Mounting Position : Rear Drive Rated Voltage (V) : 36V Rated Power (W) : 250W Max Torque N. M No-load Current (A) : <0.9A Rated Current (A) : <8.6A Wheel Size Option (Inch) : 26/27.5/700C No-load Speed (Rpm) : 295±10 Rated Speed (Rpm) : 255±10 Freehub Body : Cassette Gear Type : Gear Drive Motor Type : Brushless Number of Turns (T) : 12 Magnet Poles : 6 Spoke Specifications : 36H13G Rated Efficiency (%) : >80% Noise level (dB). 1 pcs 36V 250W Rear Wheel hub motor. 1 pcs Display (optional) 1 pcs Left PAS Sensor (free) 1 pcs Control Box (free) 1 pcs Motor Controller 1 pair Brake Lever or brake sensors 1 pcs Thumb Throttle (free) 1 pcs 1T4 Cable 1 pcs Headlight(free) 1 pcs Plastic Strap. Universal Compatibility? : Designed to fit most bike which rear dropout widths of 135-142mm with a 10-speed cassette or less, it seamlessly integrates with both V-brake and disc brake systems, enhancing versatility. The intelligent Pedal Assistance System (PAS) allows you to have throttle / pedal assit / walk assit / pedal bike 4 riding modes. The suitable riding mode can be switched as needed. It can reduce fatigue and ride more comfortably. It is great for long trips. User-friendly installation is facilitated by detailed manuals and video tutorials. The Ebike kit includes most essential accessories for a complete upgrade, allowing for a one-stop shopping experience tailored to enhance your cycling adventures. The maximum voltage this motor can handle is 36V. It is imperative that the motor be operated exclusively with a 36V battery to ensure optimal performance and avoid potential damage. Enhanced Power for Your Ride. Upgrade to an electric bike with Varstrom’s 36V 250W rear hub motor, Enjoy smooth, swift acceleration and quiet performance, with less maintenance thanks to brushless technology. 4 Flexible Cycling Modes. Choose pure electric for a no-pedal ride, pedal assist for long-distance comfort, or boost mode to make pushing your bike easier when it’s loaded or uphill. Select regular bike mode for traditional cycling. For a balanced ride, combine modes as needed. Customize your cycling experience to suit your preferences. Select from a range of intuitive displays including the widely popular EKD01, and the competitive SWM58 VD18MT and DZ40. Each display allows you to effortlessly monitor and share your cycling stats with friends. Choose the perfect battery capacity for your e-bike needs. For daily commuting, the 36V 13Ah or 15.6Ah battery is an excellent choice. If you’re planning longer trips or need fewer charges, the 36V 24Ah battery provides extended range. For bikes with limited downtube space, the 36V 20.8Ah rear rack battery is the ideal solution. All batteries are thoroughly tested for safety, ensuring a smooth and secure cycling experience. This 250W ebike conversion kit fits 26″, 27.5″, and 700C(28″, 29″) rear wheels. Important Compatibility Notes: Your bike must have a disc brake system (V-brakes and rim brakes are not compatible), a 135-142mm rear dropout, and a 10-speed or fewer cassette (not compatible with freewheels). Designed for Aluminum Alloy or Steel frames; not compatible with Carbon Fiber frames.

36V 250W Rear 2627.5700C Wheel Hub Motor Kit Ebike Conversion Kit Brushless UK

Varstrom 48V Rear Wheel Hub Motor Kit 26 27.5 700C Brushless Conversion Kits

1 pc Rear Hub Motor with Wheel. 1 pc Display(Optional). 1 pc Left PAS sensor. 1 pc Controller Box. 1 pc Motor Controller. 1 pc Brake Lever or Brake Sensor. 1 pc Thumb Throttle. 1 pc 1T4 Cable. 1 pc Plastic Straps. About Mini VD03 display. 1.5 LED Screen. About EKD01 display(Hot sale). Support:English, Frangais, Español, ltaliano, Deutsch, Polski, Nederlands, Cestina. Support Remote Locking & Unlocking(On”BIKEGO+”APP) 2.4 TFT Screen 0-9 PAS Level. 22.2/ 25.4 mm Holder. Bluetooth Function & Navigation Function. 22.2/25.4/31.8mm Holder. 3.5″ IPS Screen size, The 3.5″ IPS screen is the perfect blend of portability and performance. Its compact size is ideal for handheld devices, while the IPS technology delivers vibrant, accurate colors and wide viewing angles up to 178 degrees, ensuring a clear picture from any perspective. 0-9 PAS Level, IP67 Waterproof, Bluetooth & Navigation Function.

October 2026
M	T	W	T	F	S	S
« Sep
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31