Electric Bike Controller Kit Electric Bike Conversion Kit Front Drive For DIY

Aluminum Alloy Wheel Hub: Aluminum alloy wheel hub effectively improves the edge of the wheel hub. This material is light, high end, comfortable, with strong bearing capacity and has no noise during operation, so that you can fully enjoy the fun of riding. Good Heat Dissipation: The controller shell is made of premium metal material and has slot design, which has good heat dissipation and can avoid thermal overload of internal circuit. Practical Meter: When riding a bike, the multifunction meter will display many useful data on your bike, such as switch buttons, light switches, battery power display and other functions. The meter has a display, which allows you to keep abreast of the situation of your bike. High Performancem Meter: The meter is made of premium ABS plastic, which is light, sturdy and durable, fine in workmanship, good in toughness and waterproof performance, providing better protection for the internal circuit. Widely Applicable: The 24V 250W electric wheel kit is suitable for electric bicycles, DIY Electric bicycles, electric scooters, folding bicycles, etc. And the kit is easy to maintain. The high efficiency can greatly improve the fun of riding, and is suitable for people who like challenges. Item Type: Electric bike conversion kit Material: Stainless steel, aluminum alloy, ABS plastic, metal Weight: Approx. 6650g/234.6oz Motor Wheel Type: Front wheel motor Rated Voltage: 24V Rated Power: 250W Rated Speed: 25-28km/h Motor Speed: 207-270RPM Motor Torque N. M Motor Opening Size (mm):100mm/3.9in Motor Brake Type: V brake, disc brake Motor Wheel Position: Front wheel Motor Torque Arm: M14 Motor Magnetic Steel Height: 22H Number of Magnetic Steel Poles of Motor: 20 Motor Operating Temperature: Minus 20°-45° Waterproof Grade: IP65 Controller Connector Type: Ordinary connector(Except motor waterproof connector) Rated Voltage of Controller: DC 24V Rated Current of Controller: 10A Maximum Current of Controller: 20±1A Controller Speed Setting: 1-4.2V Controller Brake Input: Low level Low Voltage Protection of Controller: DC20±0.5V. 1 x Motor Wheel. 1 x Wire Protection Sleeve. 1 x Connecting Line. 1 x Control Box. 2 x Control Box Accessory. 1 x Power Sensor Wire. 2 x Brake Handle(Including Wire). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

Electric Bike Controller Kit Electric Bike Conversion Kit Front Drive For DIY

26 48V Electric Bike Conversion Kit Front Rear Bicycle Hub Motor Controller Kit

1 Front or Rear motor wheel. 1 Pair Power cut-off Brake lever. 1 8 Magnet Pedal Assistant Sensor. Hub Motor: 48V Brushless Non-gear (Gearless) Hub Motor. Rim: Double-wall Aluminium Alloy Rim /25mm inner width. Spoke hub: 36 hole spoke holes (hole diameter 3.2mm). Open size: 100mm (front drive)/ 135 (rear drive). Machine weight: 7.5kg. The above drawing is the size of 1000w motor. 12 MOSFET controller Fit for: 48V 1000W motor wheel , SW900 Display Rated current: 28A, Max current: 44±1A Size: 1087239. Fit for 48v1500w motor wheel , SW900 display. Rated current: 35A, max current: 70±1A. Controller Bag or box. Speed indicator, PAS grades indicator, Battery indicator, Error indicator, Single Trip Distance and Total Distance, Headlight indicator. Power on/off, Headlight on/off, 6KM/H Cruise control, Wheel size, Max speed setting, Auto stand-by and sleep mode setting, Background luminance setting, Working voltage setting. PAS sensor- 8 Magnet.

(12)Electric Bike Conversion Kit 22A Front Drive Silent Running Motor Controller

Complete Parts: The kit contains 48V 500W front drive motor, 22A controller, S866 panel, 130X thumb throttle, power assist sensor, brake lever, spokes, and installation tools. These accessories can be used separately or in combination. Brushless Motor: Brushless gear hub motor uses aluminum alloy rims, which have been carefully processed, effectively enhancing the rim edges, making it light and high end, with strong bearing capacity, and far more comfortable than other types of motors, realizing noiseless operation, allowing you to fully enjoy the fun of riding. Controller Features: The controller shell is made of premium metal with grooved design. Due to its good heat dissipation function, it can guard the internal circuit to avoid thermal overload. Multi Data Display Panel: S866 display panel has multiple functions, enabling you to view the data on the panel more easily; When riding a bike, the product will display many useful data on your bike, such as power display, backlight display, headlight display, brake display, temperature, one way time, total travel time, current speed, average speed, maximum speed, total one way distance, 6KM/H thrust boost, cruise function, etc. Wide Application: 48V 500W front drive motor kit is suitable for modification of bicycles, DIY electric bicycles, electric bikes, electric scooters, folding bikes, etc; Easy to maintain, with high efficiency, which greatly improves the riding fun and is suitable for cyclists who like challenges. Item Type: Electric Bike Conversion Kit Material: Stainless steel, aluminum alloy, plastic Controller Size: 120x50x30mm/4.72×1.97×1.18in Motor Type: Front drive motor Motor Connector: Waterproof connector (9pin) Motor Rated Voltage: 48V Motor Rated Power: 500W Motor Speed: About 30-40km/h Motor Speed: 265-325 RPM Motor Torque N. M Motor Opening Size (mm): 100mm Motor Matching Controller Current: 22A Motor Rim: P19D Motor Torque Arm: M14 Brake Disc For Motor: 160mm Motor Brake Type: V brake disc brake universal Motor Position: Front drive Motor Structure: Brushless gear hub motor Height of Motor Magnetic Steel: 22H Pole Number Of Motor Magnetic Steel: 20 Motor Operating Temperature: – 20? To 45? Connector Type of Controller: Common connector (except motor waterproof connector) Rated Voltage of Controller: DC 36V 48V Maximum Current of Controller: 22 ± 1A Controller Speed Setting: 1-4.2V Controller Brake Input: Low level S866 Display Instrument Function Description: Up button, switch button, down button, PAS mark, battery capacity indication, cruise function, power assist function, one way time, total travel time, accelerator display, 6km/h thrust power assist system, riding speed (metric system), riding speed (British system), maximum speed, average speed, distance (metric system), distance (British system), travel distance, total distance, battery voltage, brake display Backlight and headlights. Definition of Controller Line Color: 1. Black single big head wire: waterproof motor wire (9pin) 2. Red and black single big head cable: power cable 3. Red blue black green yellow single row five line port: panel line 4. Black yellow wire (two): power off brake handle wire 5. Red black white line: accelerator dial line 6. Brown black yellow wire: PAS power assist sensor wire 7. Black red lines (two): front and rear light lines. 1 x Motor Extension Wire. 1 x Panel Instruction. 2 x Power Off Brake Lever. 1 x Thumb Throttle. 1 x Power Assist Sensor. 1 x Power Assist Sensor Magnet. 40 x Spoke Nut Cap. 1 x Spoke Installation Tool. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

E-Bike Conversion Kit 36V 500W Rear Drive Cassette Hub Motor with 22A Controller

Package Includes: Bike conversion kit includes 36V 500W rear drive cassette motor, 22A controller for JN, M3 panel, 130X thumb throttle, power assist sensor, a pair of power off brake handle, spokes, spokes nuts and installation tools, manual. Aluminum Alloy Rims: Brushless gear hub motor is made of aluminum alloy rims, which have been carefully processed, effectively enhancing the rim edges, making it light and high end, with strong bearing capacity,, realizing noiseless operation, allowing you to fully enjoy the fun of riding. Heat Dissipation Housing: The bike controller adopts metal housing with grooved design to provide fast heat dissipation, which can defend the internal circuit and thus avoid thermal overload, stable and reliable. Riding Data Display: M3 panel can display multiple riding datas such as power, backlight, headlight, brake, temperature, one way time, total travel time, current speed, average and maximum speed, total and one way distance, 6KM/H thrust assist. Applications: The 36V 500W rear drive motor kit is suitable for modification of electric bikes, DIY electric bikes, electric scooters, folding bikes, etc. Easy maintenance, high efficiency, greatly improve riding fun, suitable for cyclists who like a challenge. Item Type: Electric Bike Conversion Kit Material: Stainless Steel, Aluminum Alloy, Plastic Controller Size 120 x 50 x 30mm / 4.7 x 2.0 x 1.2in Motor Type: Rear Drive Cassette Motor Motor Connector: Waterproof Connector (9pin) Motor Rated Voltage: 36V Motor Rated Power: 500W Motor Speed: Approx. 35-45km/h Motor Speed: 265-325 RPM Motor Torque: 60-63 N. M Motor Open Gear Size: 142mm / 5.6in Motor Matching Controller Current: 22A Motor Wheel Rims: P19D Motor Torque Arm: M14 Motor Applicable Brake Disc: 160mm / 6.3in Motor Brake Type: V Brake, Disc Brake Common Motor Position: Rear Drive Motor Structure: Brushless Gear Hub Motor Motor Magnet Height: 22h Motor Magnet Pole Number: 20 Motor Working Temperature: -20-45? Controller Connector Type: Common Connector (In Addition To The Motor Waterproof Connector) Controller Rated Voltage: DC 36V 48V Controller Maximum Current: 22±1A Controller Speed Setting: 1-4.2V Controller Brake Input: Low Level M3 Panel Function Description: Up Button, Switch Button, Down Button, PAS Mark, Battery Capacity Indication, Cruising Function, Power Assist Function, One Way Time, Total Travel Time, Throttle Display, 6km/h Thrust Assist System, Riding Speed (Meter), Riding Speed (Imperial), Maximum Speed, Average Speed, Distance (Meter), Distance (Imperial), Travel Distance, Total Distance, Battery Voltage, Brake Display, Backlight and Headlights Controller Wire Color Definition: 1. Black Single Big Head Wire: Waterproof Motor Wire (9pin) 2. Red and Black Single Big Head Wire: Power Wire 3. Red, Blue, Black, Green and Yellow Single Row Five Wire Port: Panel Wire 4. Black and Yellow Wires (Two): Power Off Brake Handle Wire 5. Red, Black and White Wires: Thumb Throttle Wire 6. Brown, Black and Yellow Wire: Power Assist Sensor Wire 7. Black and Red Wire (Two): Front and Rear Light Wires. 1 x Thumb Throttle. 40 x Spoke Nut Covers. 1 x Spoke Installation Tool. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

350W 24V/36V Electric Bicycle Conversion Kit Motor Controller Drive Motor Set

Important NOTE: This item is for the bike that uses the hub diameter less than 36mm. This item doesn’t include battery or charger. This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel. Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance. The twist/thumb throttle kit includes: 1. 1x brush motor with freewheel 2. 1x Customized sprocket & components 4. 1x Motor controller 5. 1x Mounting plate + bolts 6. 1x Twist throttle /thumb throttle(with battery indicator & key switch). 24V/36V 350W Electric Bicycle Conversion Kit Motor Controller Drive Motor Kit UK. This item is for the bike that uses the hub diameter less than 36mm. 1x brush motor with freewheel. 1x Customized sprocket & components. 1x Mounting plate + bolts. 1x Twist throttle /. (with battery indicator & key switch). Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

350W 24V/36V Electric Bicycle Conversion Kit Motor Controller Drive Motor Set

36V 250W Electric Conversion Kit Wheel Hub Motor Controller Meter Kit

Brushless Gear Hub DC Motor: The brushless gear hub DC motor is made of aluminum alloy rim and processed with fine craftsmanship, which effectively enhances the edge of the rim, looks light, has strong bearing capacity, and is far more comfortable than other types of motors, realizes noise free operation, and allows you to fully enjoy riding. Controller Housin and Display Meter: The controller housing is made of metal with a grooved design, which protects the internal circuits from thermal overload due to good heat dissipation. The display meter is made of ABS plastic material, which is light, strong and durable, with fine workmanship, good toughness and waterproof performance, providing better protection for the internal circuit and making it more durable. Multifunctional LCD7U Display: While cycling, the display will display many useful data on your bike, such as battery level display, backlight display, headlight display, Brake display, temperature, one way time, total travel time, current speed, average speed, maximum speed, total one way distance, 6km/h thrust assist, cruise function, Bluetooth display, etc. Wide Range of Applications: 36V 250W front drive 20 inch motor wheel kit is suitable for bicycle, mountain bike, lithium battery modified front drive cassette flywheel electric bike, DIY electric bike, electric bike, electric scooter, folding bike, etc; easy to maintain, electric bike, moped, mountain bike modified conversion motor, high efficiency, greatly improve riding fun, suitable for cyclists who like challenges. Bicycle Lithium Battery Conversion Kit: Bicycle lithium battery modified 20 inch front drive kit includes 36V 250W front drive 20 inch motor wheel, 15A controller, LCD7U display, thumb throttle, 8 magnetic boosters, a pair of power off brake levers, controller box, manual. Color: As Pictures Shown Weight: Approx. 5.6kg / 12.3lb. Motor Wheel Type: Front Drive Motor Wheel (Waterproof Joint) Motor Rated Voltage: 36V Motor Rated Power: 250W Motor Speed: About 25-28km/h Motor Speed: 207-270 Rpm Motor Torque N. M: 29-31.2 N. M Motor Opening Size (mm): Approx. 100mm / 3.9in Motor Matching Controller Current: 15A Motor Rim: P19D Motor Torque Arm: M 14 Brake Disc for Motor: 160mm / 6.3in Motor Brake Type: V Brake / Disc Brake Universal Motor Wheel Position: Front Wheel Motor Structure: Brushless Gear Motor Motor Magnet Height: 24H Motor Magnet Pole Number: 20 Motor Operating Temperature: Minus 20°-45° Controller Connector Type: Ordinary Connector (Except Motor Waterproof Connector) Controller Rated Voltage: DC 36V, 48V Controller Rated Current: 7A Controller Maximum Current: 15±1A Controller Speed Setting: 1-4.2V Controller Brake Input: Low Level Controller Low Voltage Protection: DC 30/40±0.5V. Controller Wire Color Definition: 1. Black single big head wire: motor wire (waterproof connector) 2. Red and black single big head line: power line 3. Red, blue, black, green and yellow single row five wire port: display line (5pin) 4. Red and blue lines (two): power off brake handle line 5. Red, black and white lines: thumb throttlel (3pin) 6. Brown, black and yellow line: power assist sensor line (3pin). LCD7U Display Function Description: Up button, switch button, down button, power assist sensor sign, battery capacity indication, cruise function, one way time, total travel time, throttle display, 6km/h thrust assist system, riding speed (metric), riding line speed (Imperial), maximum speed, average speed, distance (metric), distance (imperial), travel distance, total distance, battery voltage, brake display, backlight and headlights, bluetooth display. 1 x Motor Wheel. 1 x LCD Display. 1 x LCD Display Manual. 2 x Power off Brake Lever. 1 x Power Assist Sensor. 1 x Controller Box. 2 x Controller Box Mounting Ring. 8 x Controller Box Screw. Note the opening of the rim. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

36V 250W High Quality 20in E-Bike Conversion Parts Kit +Controller KT-900S Meter

Make your bicycle turn into an electric moped, brushless hub motor, noise-free operation, and fully enjoy the fun of riding. Suitable for DIY electric bikes. Fits for 20 inch rims. The speed of the motor is 25km/h, which is suitable for riders who like challenges. 36V 250W motor specification, strong and powerful. It is very easy to install and easy to operate. Item Type: Electric Bicycle Conversion Set Color: As Pictures Shown Speed: 25 km/h. 183cm/72in Fits for 20in Rims. 1 x Throttle Grip. 1 x Throttle Grip Clamp. 1 x Spoke cap installation wrench. This model is suitable for 20-inch 36-hole bicycle rims. Please confirm the specifications and size when purchasing. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

350W 24V/36V Electric Bicycle Conversion Kit Motor Controller Drive Motor Set

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30