THE UK’S LARGEST VAN ACCESSORY SPECIALIST. UK’s LEADING Distributor. FOR VW T7 TRANSPORTER AWNING RAIL & DRIVE AWAY CONNECT KIT SWB BLACK. VW TRANSPORTER T7 L1 L2 2025> AWNING RAIL & DRIVEAWAY CONNECT KIT BUNDLE The ultimate “All-in-One” connection solution developed specifically for the all-new Volkswagen Transporter T7 (2025 onwards). Includes a Drive-Away Kit (6mm to 6mm) paired with a precision-engineered C-profile awning rail. Utilises the T7’s factory-threaded roof mounting points for a 100% No-Drill installation, preserving your new van’s bodywork. Designed for “Drive-Away” functionality-simply slide the Kador strip out to leave your awning standing while you explore. Fully compatible with Outdoor Revolution, and VASTYLE drive-away awnings featuring a standard 6mm Kador bead. Supplied with a 4m Kador strip and multi-section Figure-of-8, allowing you to trim the kit to the exact length of your T7 roofline. Specification Rail Material: High-Grade Extruded Aluminium Rail Finish: Available in Anodised Silver or Powder Coated Satin Black Driveaway Kit: 6mm to 6mm (4-Metre Length) Installation: Bolt-on using existing factory roof points (No Drilling) Compatibility: All Drive-Away Awnings with 6mm Kador Bead. Vehicle Fitment: VW Transporter T7 L1 (SWB) 2025 onwards VW Transporter T7 L2 (LWB) 2025 onwards IMPORTANT: Not suitable for T7 Multivan models or vehicles with Pop-Top roofs. Contents: 1x Vehicle Specific C-Profile Awning Rail (Silver or Black) 1x Driveaway Kit (4m Kador Strip & Figure-of-8 Sections). Please note – The Kador strip is supplied as a 4m length and the Figure-of-8 in sections; both are designed to be trimmed to size by the installer to perfectly match your specific van’s roof length. How does it fit? The rail aligns with the factory-threaded holes on your roof. Simply remove the blanking plastic screws, position the rail, and bolt down. If you have roof bars, the rail sits underneath the feet. Can I still use my Roof Bars? These rails are designed to be low-profile. You can place the awning rail over the mounting holes and then bolt your roof bar feet directly through the rail into the van for a secure “sandwich” fitment. Will this fit a Pop-Top roof? This specific bolt-on kit is designed for vans with standard factory roofs. If you have a pop-top, the mounting points are usually obstructed or removed, so we do not recommend this kit for those vehicles. Can I pick them up? We have been UK distributors for many of the world’s finest 4×4, Van & MPV accessories manufacturers since 1988. At Palm Automotive VanStyle we have over 25 years experience in sourcing for 4×4, Van & MPV accessories from some of the finest factories in the world. You can be assured of good service and at a great price! A VAT receipt will be sent out with the goods. Want to return something? SIGN UP FOR OUR NEWSLETTER. THE UK’s LARGEST VAN SPECIALISTS. LONG ESTABLISHED VAN ACCESSORY SUPPLIES.
